Vita-Course Technologies Co. Ltd. DISCOVERY Manuel D’Utilisation
2. Desktop equipment and other equipment that used for calibration must be qualified products,
which are approved by the National Metrology Department and periodically calibrated.
Methods of
blood pressure measurement refer to Guidelines for Chinese blood pressure measurements.
Input methods refer to App operation guide.
3.4 Measurement
1. Set up the measurement mode and then carry out measurement as shown in figure 3.5;
If you want the equipment to enter automatic measurement and dynamic continuous
measurement mode, please ensure that the battery power is more than 3 squares
2. After the equipment enters dynamic continuous measurement mode, you could look at the
present situation of measurement by connecting mobile phone APP to the equipment and after the
mobile phone APP is disconnected, the dynamic continuous measurement of the equipment is not
affected.
Figure 3.5 measurement interface
Content
Name
Meaning
Dynamic continuous
measurement mode
measurement mode
Indicating that the equipment is in dynamic
continuous measurement mode
continuous measurement mode
Mark of
dynamic
measurement mode
Indicating that the equipment is in dynamic
measurement mod
Power Icon
Displaying the condition of using the battery
Zhang Aihua
Name
Representing patients’ name
120/80 mmHg
Blood pressure value
Representing a systolic / diastolic pressure
value
value
70 bpm
Pulse rate value
Representing pulse rate value
3.5 Measuring result
After the finish of measurement, the value of measuring results will be displayed. If the result is
normal, it would be like the figure; the blood pressure analysis report can be printed through mobile
phone APP and the specific operating procedure can be seen in guidance of APP operation;
Zhang Aihua
Zhang Aihua