Dongguan Bashang Electronic Technology Co. Ltd BXBS101 Manuel D’Utilisation

Page de 1
BX-BS-101 wired connection:
In addition to operating wirelessly, your BX-BS-101 can be 
connected to a music source using the supplied audio cable. 
Cable connection is useful if the battery is low or If BX-BS-101 is 
to be used with a non-Bluetooth audio source device.To Connect 
the supplied cable to your BX-BS-101 take one end of the 
connection cable and carefully insert it into the socket beneath on 
the Speaker.
The audio cable must be disconnected for BX-BS-101 to switch 
on and connect via Bluetooth, however its battery can be charged 
while the audio cable is connected. 
To charge BX-BS-101 follow the steps described below.
Using the supplied USB charging cable, connect the speakers to 
a powered USB socket; either a computer USB socket, a mains 
plug USB charger or an in-car charger.
Note: Connecting the audio cable will automatically switch 
off the Bluetooth and powered elements of BX-BS-101, BX-
BS-101 will not however switch automatically when the audio 
cable is disconnected.  
This device complies with part 15 of the FCC Rules. Operation is 
subject to the following two conditions:
(2) this device must accept any interference received, including  
interference that may cause undesired operation. 
This equipment has been tested and found to comply with the limits for 
a Class B digital device, pursuant to part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help. 
MODIFICATION: Any changes or modifications not expressly approved 
by the grantee of this device could void the user’s authority to operate 
the device.
FCC Warning:
(1) This device may not cause harmful interference, and 
单页尺寸:65*85mm