International Products Sourcing Group PS3D Manuel D’Utilisation

                                                                                                                                                           
                                                                                                                                                         

  Inventor User Guide | www.flashforge.com                                              0086‐ 0579‐82273989 

 

 

25

A correctly leveled build plate will almost always guarantee a quality 3D object. When 

printed objects have issues, the first step to diagnose is to check and double-check to 

make sure the build plate is leveled. A general rule of thumb is to leave a gap that is the 

thickness of a piece of paper. However, for printing finer objects (150 micron and 

lower), please use a feeler gauge to level the build plate as it requires a lesser gap 

between the nozzle and the build plate. 

 

The Inventor utilizes a three-point leveling system for its build plate. At the bottom of 

the build plate, there is one spring-loaded knob in the front and two in the back. 

Tightening the screw will create a bigger gap between the build plate and the nozzle 

while loosening it will create lesser gap. 

5-1 

1.  （5-1）From the main menu, select 

 and

. The extruder and the build 

plate will begin to move to the starting position. 

5-2