Schneider Electric Solar Inverters USA Inc. FXRP-BT Manuel D’Utilisation
Installing the Remote Panel Unit on the Wall
http://www.xantrex.com
PN: 808-0817 / 808-0817-01
Freedom X Remote Panel
User Guide
7
A
976-0367-01-01 Rev C
12-2017
Copyright © 2017 Schneider Electric. All Rights Reserved.
All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies.
page 3
Creating a Bluetooth Link with the Freedom X Remote Panel App
1. Download and install the Freedom X Remote Panel
app into a compatible smartphone (or tablet).
2. Ensure that the Freedom X Remote Panel
(manufactured after Jan 2018) is switched ON
using the ON/OFF button on its front panel. The
Freedom X Remote Panel Bluetooth signal should
now be detectable.
3. Turn on your smartphone or tablet. Go to Settings >
Bluetooth to scan for Bluetooth devices.
4. Search for
FXRP and select it. Wait for a
connection to be established.
The Freedom X Remote Panel app allows you to
conveniently monitor and configure a Freedom X inverter
(or a Freedom XC inverter/charger) with a compatible
smartphone or tablet using a Bluetooth connection.
4. Switch to the Freedom X Remote Panel app. It should
now display inverter system status to monitor/configure
the Freedom X/XC inverter unit (manufactured after Jan
2018).
5. To stop the remote control features, turn OFF the unit
using the Freedom X Remote Panel ON/OFF button and
close the Freedom X Remote Panel app.
1. Place the template on the wall.
2. Mark the corners (or trace the dotted lines) of the
2. Mark the corners (or trace the dotted lines) of the
recess outline on the wall.
3. Mark the two mounting holes for the two screws
on the wall.
4. Remove the template from the wall.
5. Cut along the recess outline on the wall to make
5. Cut along the recess outline on the wall to make
a hole for the remote panel’s body.
6. Pre-drill the mounting holes appropriate to the
mounting screws (not provided) that will be used.
7. Connect the 6-conductor com cable to the RJ12
ports on the inverter and remote panel.
8. Mount the remote panel unit on the wall.
recess outline
mounting
hole
mounting
hole
Mounting Template
126.0 mm
107.0 mm
51.0 mm
NOTE: Ensure the inside wall is free of obstructions,
such as pipes, insulation, and electrical wiring.
Ensure the recess depth is more than 50 mm.
Ensure the recess depth is more than 50 mm.
allow enough
space for
connecting the
com cable plug
38.0 mm