IZZO Golf Inc. C10524 Manuel D’Utilisation
User Manual
CAL TRAVERSE ELECTRONIC CART
#C10524
Callaway Traverse Electric Cart
Contents:
1. Traverse cart
2. Battery
3. Charger
4. Remote
2. Battery
3. Charger
4. Remote
Initial set up:
The Traverse will require some assembly once it is removed from the package. The wheels will need to
be attached for use. In order to attach the wheels, push and hold the silver push pins on each of the
wheels. Next, slide the wheel over the axle. On each of the wheels there are 4 hex bolts. These bolts fit
into the holes on the axle hub of each side. The wheel will install correctly when the 4 hex bolts fit into
the 4 holes on the axle hub. On each axle there are 2 grooves for the wheel pins to lock into. The first
groove keeps the wheels on the cart but does not connect the wheels to the motors. This allows the
cart to be used as a traditional push cart in the event that your battery dies or would like to push the
cart manually. The second groove connects the wheels to the motor hubs. The wheel will be correctly
connected to the motor when the 4 bolts fit into the 4 corresponding holes on the axle hub. Also the
wheel will sit flush against the axle hub rather than have a space.
be attached for use. In order to attach the wheels, push and hold the silver push pins on each of the
wheels. Next, slide the wheel over the axle. On each of the wheels there are 4 hex bolts. These bolts fit
into the holes on the axle hub of each side. The wheel will install correctly when the 4 hex bolts fit into
the 4 holes on the axle hub. On each axle there are 2 grooves for the wheel pins to lock into. The first
groove keeps the wheels on the cart but does not connect the wheels to the motors. This allows the
cart to be used as a traditional push cart in the event that your battery dies or would like to push the
cart manually. The second groove connects the wheels to the motor hubs. The wheel will be correctly
connected to the motor when the 4 bolts fit into the 4 corresponding holes on the axle hub. Also the
wheel will sit flush against the axle hub rather than have a space.
Axle with 2 Grooves:
1
st
Axle Groove
2
nd
Axle Groove
4 holes on axle hub