Universal Devices Inc. ISY994 Manuel D’Utilisation
- 1 -
ISY994zw Quick Setup Guide
This product is a security enabled Z-Wave product that is able to use encrypted Z-Wave
messages to communicate with other security enabled Z-Wave products.
This product can be included and operated in any Z-Wave network with other Z-Wave
certified devices from any other manufacturers. All constantly powered nodes in the same
network will act as repeaters regardless of the vendor in order to increase reliability of the
network.
messages to communicate with other security enabled Z-Wave products.
This product can be included and operated in any Z-Wave network with other Z-Wave
certified devices from any other manufacturers. All constantly powered nodes in the same
network will act as repeaters regardless of the vendor in order to increase reliability of the
network.
1.
ISY Installation
1. Connect one of the included Cat5e cable to ISY’s Network Port and to your
network hub.
Note: the network must initially be DHCP enabled. If DHCP is not enabled,
please configure ISY with a static IP address the instructions for which you will
find
Note: the network must initially be DHCP enabled. If DHCP is not enabled,
please configure ISY with a static IP address the instructions for which you will
find
2.
Host Computer Configuration
1. If you do not have Java installed, please install the latest for your platform. You
. Please
choose the latest JRE for your platform
2. Start a Web Browser of your choice and go to
and password
3. If you would like to access your ISY without a browser, please go to
4. On Universal Devices Administrative Console, choose Help | About (Figure 2)