Shenzhen SEI Robotics Co. Ltd. B06A Manuel D’Utilisation
Remote control physical function requirements description
1. Remote control key
System Code: 0x06FE Code Format: NEC
System Code: 0x06FE Code Format: NEC
Usage Page
Usage ID
IR CODE
Power
0x07
0x0066
0x00
Back
0x0C
0x0224
Home
0x0C
0x0223
Voice search
0x0C
0x0221
Center（select）
0x0C
0x0041
Up
0x0C
0x0042
Down
0x0C
0x0043
Left
0x0C
0x0044
Right
0x0C
0x0045
Voice+
0x0C
0x00E9
Voice-
0x0C
0x00EA
Menu
0x07
0x0076
Remote control operating instructions
1. Remote control special requirements
1) When connected to Bluetooth, the remote control sends the Bluetooth key
value; if Bluetooth is not connected, it sends the infrared key value.
(Only standby button infrared)
2) indicator: red, each time you press the button, the indicator light flashes
1) When connected to Bluetooth, the remote control sends the Bluetooth key
value; if Bluetooth is not connected, it sends the infrared key value.
(Only standby button infrared)
2) indicator: red, each time you press the button, the indicator light flashes
Low Voltage Reminder: When the power is low, the indicator light flashes rapidly.
As long as the indicator is still operating, it will stay blinking. When the remote
controller is no longer operating, it flashes 5 times or flashes for 3 seconds,
then stops and goes out.
3) Support Bluetooth remote control online upgrade, and can be triggered by
the HOST side upgrade.
4) Pairing method: Press and hold the "OK" + "BACK" button at the same time
for 3 seconds, the indicator light flashes, and the pairing success indicator light
turns off for 3 seconds.
Connection interval <12ms
5) Remote control distance: ≥10m
6) Bluetooth device name: B06A
2, remote control other requirements
1) Pairing requirements: No Bluetooth devices can not be scanned or can not
be paired (including continuous pairing keys in a short period of time), please
verify 50 times to ensure no problems;
2) back to the functional requirements: there should be no back to back the
problem, including the box back to the power, the remote power-off back to
connect, put it aside for 2 hours and so on, please verify 50 times to ensure that
As long as the indicator is still operating, it will stay blinking. When the remote
controller is no longer operating, it flashes 5 times or flashes for 3 seconds,
then stops and goes out.
3) Support Bluetooth remote control online upgrade, and can be triggered by
the HOST side upgrade.
4) Pairing method: Press and hold the "OK" + "BACK" button at the same time
for 3 seconds, the indicator light flashes, and the pairing success indicator light
turns off for 3 seconds.
Connection interval <12ms
5) Remote control distance: ≥10m
6) Bluetooth device name: B06A
2, remote control other requirements
1) Pairing requirements: No Bluetooth devices can not be scanned or can not
be paired (including continuous pairing keys in a short period of time), please
verify 50 times to ensure no problems;
2) back to the functional requirements: there should be no back to back the
problem, including the box back to the power, the remote power-off back to
connect, put it aside for 2 hours and so on, please verify 50 times to ensure that