SES-imagotag Deutschland GmbH LANCOM Manuel D’Utilisation
SES-imagotag Deutschland GmbH
Bundesstraße 16 I 77955 Ettenheim – Deutschland Amtsgericht Freiburg, HRB 708587 | UstID DE283921477
IBAN: DE88 6805 0101 0013 1953 11 | BIC: FRSPDE66XXX | Sparkasse Freiburg
Telefon + 49 7822 861996-0 | Email info.de@ses-imagotag.com | URL www.ses-imagotag.com
Geschäftsführer: Michael Unmüßig, Thomas Schwarz, Thierry Gadou
IBAN: DE88 6805 0101 0013 1953 11 | BIC: FRSPDE66XXX | Sparkasse Freiburg
Telefon + 49 7822 861996-0 | Email info.de@ses-imagotag.com | URL www.ses-imagotag.com
Geschäftsführer: Michael Unmüßig, Thomas Schwarz, Thierry Gadou
How to connect the LANCOM LN-830E+ to fbOS
You will need at least fbOS version
3.9.3b4 installed.
The LN-830E+ needs at least firmware version
10.12.0243.
You need the
LN-830E+ version of the Router, LN-830E is not supported.
The LN-830E+ can only be connected to
one fbOS-instance at the same time.
1.
Make sure the LN-830E+ is powered on and connected to your network (LANCOM manual).
Connect to the LN-830E+ by typing the IP-ADDRESS in the address field of your browser (to
get the IP-ADDRESS you can use the LANCOM LANMonitor). It is recommended to use a static
IP-address for each LN-830E+ you want to connect.
2.
If the router is un-configured the setup-wizard starts automatically:
3.
Complete the setup-wizard by following the steps. If the router is already configured the
login window opens (instead of the setup-wizard):
4.
Connect to the fbOS by typing the IP-ADDRESS of your Master Access-Point / Core in the
address field of your browser. Login (see quickstart).
5.
Navigate to „ Devices “
Æ „Servicemonitor“ and click on „Add LANCOM“.