LSTN INC. LSTNBEACON Manuel D’Utilisation

 

 

Product Specication

LSTN BEACON

User’s manual

Multi function key

Charging jack

(5 pins micro)

ON/OFF

Earcap

Version: 4.2
Supports:A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/DI1.3
Chipset: CSR 
Frequency: 2.4GHz
Sensitivity: -80db＜0.1% BER
Wireless range: about 10m
Work time: Around 3 hours
Standby time: up to 100 hours
Battery capacity: 50mAh for earphone and 500mAh
for charging base

Accessories
User manual
USB CHARGING CABLE
Earcap:3 pairs (S,M,L size) 
Earhook:4 pairs

Funtions

1.Power on: Press and hold the function key around 3 

seconds(until you hear “power on” or until the indicator 

light is flashing JUST red)

2.Power off: Press and Hold ONE of the earbuds 

function key for 3 seconds (until you hear “power off” or 

until the indicator light flashes red and then turns off)

3.To pause: short press the function key once.

4.Next song: short press the function key twice.

5.Answer a call: short press the function key once.

6.Hang up a call: short press the function key once.

7.Reject call: short press the function key twice.

Pairing

1.Press and hold the function key of one earbud 

for 5 seconds ( until the indicator light is flashing 

blue and red ).

2.Press and hold the function key of the other 

earbud for 2 seconds (Until the indicator light is 

flashing JUST red).

3.Go into your device and find “LSTN BEACON” 

in your BT available devices.

Charge the charging base

Please charge the charging case by USB cable. 

The indicator light on charging case ALL stay 

blue color, charging is finished

Charge the earphone

Put the earphone into charging base and then 

switch the “ON/OFF” to on, Charging will be 

started. The indicator light on earphone stay 

blue color, charging is finished

FCC Statement
This equipment has been tested and found to 

comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable 

protection against harmful interference in a 

residential installation. This equipment gener-

ates, uses and can radiate radio frequency 

energy and, if not installed and used in accor-

dance with the instructions, may cause harmful 

interference to radio communications. However, 

there is no guarantee that interference will not 

occur in a particular installation. If this equip-

ment does cause harmful interference to radio 

or television reception, which can be determined 

by turning the equipment off and on, the user is 

encouraged to try to correct the interference by 

one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and 

receiver.
• Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician 

for help.
Caution: Any changes or modifications to this device not 

explicitly approved by manufacturer could void your authority 

to operate this equipment.
This device complies with part 15 of the FCC Rules. 

Operation is subject to the following two conditions: (1) This 

device may not cause harmful interference, and (2) this 

device must accept any interference received, including 

interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF 

exposure requirement. The device can be used in portable 

exposure condition without restriction.