Dongguan Sen Dong Lv Electronics Co. Ltd B1326 Manuel D’Utilisation
Package Contents
Appearance
Instructions
● Connect equipment
● Play Control
● Phone control
● Headphone charging
● Power ON /OFF
1.Earphone
2.USB charging cable
1.Volume + button
5.Volume- button
2.Multifunction button
6.USB charging port
3.LED indicator
LED indicator
4.Microphone
● Press and hold the multi-
function button for 3 seconds.
The blue indicator flashes 3
times and the voice prompts
"Beep".
LED indicator
Power ON
Power OFF
Reset
● Press and hold the multifunction
button for about 3 seconds.
The red indicator flashes 3
times. The voice prompts
“Beep”.
● Press and hold the multifunction
button for 8 seconds to restore
the factory design settings.
Before pairing, make sure that your headphone has
enough power and that your connect source device is
paired and connected within the effective range of use.
● Pairing
Turn on B1326 headphone and
press the multifunction button
for about 5 seconds.
Red and blue lights flash alternately
indicating that the EN61 enters
pairing mode and is ready to
connect to your Bluetooth device.
Voice prompt "pairing".
● Successful connection
The Bluetooth device searches for
EN61 and connects, and the blue
light flashes quickly.
● One Press Volume +
Long press next track
● One Press Volume up
● One Press Volume down
Long press play previous
● One Press Volume -
Long press play previous
● One Press Multifunction
button Play/Pause
● One Press the multi-function
button to answer the call
● Press and hold the multifunction
button for about 2 seconds to
reject the call
● Short press the multifunction
button to end call
● Press and hold the multifunction
button for about 2 seconds to
reject the call
● Short press the multifunction
button to end call
●
Low Power
When the battery power lower less than 15%, there will be
a "beep beep" voice prompt ,every 7 seconds the red
indicator will flash 2 twice.
● Gently insert the Micro USB cable into the Micro USB
charging port of the headphone, and gently insert the other
end of the Micro USB cable into the USB port of the charger
or the computer's USB port to charge the headphone. It
takes 1.5hours to fully charge the battery.
Note: When using the USB cable to charge the
earphones, in order to protect the battery life, long
press the multifunction button can not boot the
earphone. , You need to pull out the USB cable, long
press the multifunction button to boot the earphone.
● Specifications
● Attention
● Battery: 80mAh
● Input voltage: 5V/65mA
● Charging time:1.5hours
● Standby time: 80hours
● Playing time: ≥5hours
● Bluetooth connection distance: ≥10m
● Operation, storage and charging temperature: 0°C-40°C
● Input voltage: 5V/65mA
● Charging time:1.5hours
● Standby time: 80hours
● Playing time: ≥5hours
● Bluetooth connection distance: ≥10m
● Operation, storage and charging temperature: 0°C-40°C
● For safety, do not use headphones when riding a bicycle,
motorcycle, or driving. It is dangerous to open the
volume too loud and can not hear outside sounds. Please
pay attention to careful driving and surrounding vehicles.
● Don’t disassemble, avoid dropping.
● Do not place this product in a hot, humid environment.
● Do not put this product into fire, water, or corrosive
cleaner.
● common problem
If B1326 wireless Bluetooth headphone does not turn on?
● Check if the battery of your B1326 wireless Bluetooth
headphone has enough power.
● If your computer's own battery is exhausted, your
computer's USB port will not be able to charge the
EN61's battery. If charging the B1326's battery with a
5V (1A or 2A) USB charger, charging time should be at
least Charge 2-3 hours.
If there is no sound in the headphones when you play
music?
● Check whether the device and the Bluetooth headphone
establish a valid connection. If the audio device fails to
connect properly, reconnect it and adjust the volume of
the phone and Bluetooth headphone to an appropriate
volume level.
If the phone cannot search the Bluetooth headphone?
● Please confirm whether the Bluetooth of the mobile
phone is in the “Device Visible Mode”. If the pairing is
not performed for a long time, the Bluetooth pairing
function will be automatically closed. Please turn
Bluetooth on again to “Device Visible Mode”. If there
is phone program error, please restart the phone; if
headphone bluetooth goes wrong, please restart the
Bluetooth.
Bluetooth Wireless Earphone
MODEL:B1326
User Manual
● Pairing timeout
The red and blue lights quickly flash alternately and turn off
automatically after 3minutes. Voice prompt "beep."
● Disconnect
Manually disconnect the Bluetooth on the device,and the red
indicator will flash quickly after 5 minutes.The connection
between the device and the B1326 is out of the valid range
(10 meters) .The blue light indicates “beep” every 15
seconds for the first 5 minutes and turns off after 5 minutes.
● Connect two mobile phones at the same time
After successfully pairing to the first phone, close B1326
and reboot to enter the pairing state. After connecting the
second phone, turn off the headphone again. Then the
connection will be automatically connected to the second
phone, manually connect the first mobile phone on the
phone. The blue light flashes 3 times for 1 second.
In your wireless Bluetooth device: iPhone, iPad, iPod and
In your wireless Bluetooth device: iPhone, iPad, iPod and
Android smartphone or tablet.
● Open the "Settings" feature on your Bluetooth device.
● Make sure the "Bluetooth" option on your Bluetooth
device is turned on. Click the "Search" function.
● Wait for the B1326’sBluetooth name to appear in the
Available Devices' Bluetooth list.
● Select the B1326 Bluetooth name and start pairing and
connection with your Bluetooth device.
● The blue light on your B1326 wireless Bluetooth earphone
flashes quickly, indicating that your wireless Bluetooth
earphone has been paired successfully and you can start
playing and listening to your favorite music.
● The battery of your EN61 wireless Bluetooth headphone
is only partially charged at the factory. We recommend
that you fully charge the battery before playing it. This
will allow you to enjoy the longest play time.
● Steady red charging
● Steady red charging
Steady blue full charged
● Do not place this product on flammable substances
when charging.
● If you remove or replace the internal battery by yourself,
there is a risk of explosion.
● Avoid excessive loud volume or wear headphones for a
long time to avoid hearing loss.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be u
sed in portable exposure condition without restriction
Warning:
The device has been evaluated to meet general RF exposure requirement. The device can be u
sed in portable exposure condition without restriction
Warning:
Products suffer from static electricity and need to be manually connected.