Shenzhen Saga-link Technology Co. Ltd. TWST6 Manuel D’Utilisation

1. Don’t drop, crash, scrub, twist, beat, grind, or throw into water.

2. Please make sure stay far away from magnet, electric appliance and 

loudspeakerwhen using bluetooth earbuds.

3. Please don’t put earbuds in extreme temperature.

4. Please don’t put earbuds exposed in moist environment.

1. Take out either one of the earbud from charging case, turn on Bluetooth function on your phone, 

you will find 

   T6-TWS  or    T6-TWS  on the list of available devices, click and connect, the 

earbud will hint “device connected” and it is ready to be used.

2. Then the other earbud in charging case can be used to pair to another phone.

3. Make sure the other earbud is in charging case when pairing the first one, or it will be recognized 

as a pair of earbuds not a single one.

for charging （see picture on next page）

Charging Port

3. Indicators for charging case

Red is on when charging for the case, green is on

when the case is fully charged.

4. Indicator for charging earbuds

Green is on when earbuds are charged by the case,

indicator is off when earbuds if fully charged.

Charge the earbuds for 2-5H

Re-paired

Not paired correctly

Low voice

Can not hear 

the music

There is noise 

when talking

No hint after paired
Can talk but red 

light is on
No lights on 

when charging

Echo

Not wear earbuds correctly

Adjust the position of earbuds

The phone doesn’t  support

Need a phone support BT stereo

Environmental disturbance 

or too far away from device

Change the environment or move 

to place near the device

Too large volume or too 

noisy environmental

Turn down the volume or change 

the environmental

No output from power supply

Check the power supply if 

connected weill

Low battery

Can not turn on / 

Turn off automaticly

Red light is on for lower battery Charge for the earbuds

Earbuds

Cover

Charging case

Product Name: True Wireless Bluetooh Earbuds
Bluetooth Version: Version 5.0

Protocol:V5.0+EDR, supporting HSP/HFP/A2DP//

VRCP protocol can be downward compatible with 

other versions 

Chipset: RTL8763BFR
Call Time: 5-6H (1 time full charged)
Play Music Time: 5-6H  (1 time full charged)
Battery: 3.7V, >50mA Li Battery
Charging Time: 1-2H
Working Temperature: -10°-55°

Input: 5V ±0.25V/1A
Output: 5V ±0.25V/50MA
Battery Capacity: 450MA

Auto-Turn on and Auto-Pair: Take out the two earbuds from the charging case, you will see the 

LED lights are twinkling (blue or red), 2-3s later, it hint “Power ON, Device connected”, Right earbud 

hint “right channel”Left earbud hin “left channel”, then the R/L earbuds paired successfully, ready for 

being searched by phone.
Pair to Phone:  Turn on Bluetooth function on your phone, find Model NO.  T6-TWS  in the list of 

available devices,  click to connect, it will show CONNECTED on your phone, and the LEFT earbud will 

hint “Device connected”. Then it is paired successfully.

Double click

L

Next

Double click

R

Prev

Click 3 times

R

Volume +

Click 3 times

L

Volume -

NEXT/PREV Songs: Double click on the LEFT earbud(R), it plays next song, double click on the  left 

earbud, it plays previous song. 

Volume +/-: Constinuous press right earbud 3 times to turn up the volume; continuous press left earbud 

3 times to turn down the volume, or you can adjust the volume on the phone directly.

Auto pairing: Auto pair to the phone used last time when taking out earbuds from charging case  

The two earbuds are well paired before packaged, but if they can not paired well due to 

some wrong operations, pls. do as following steps to re-pair the earbuds. 

Power off the two earbuds, then press the button of the two earbuds at same time and do 

not release for about 20s, blue lights sparkled 3 times ----> red and blue lights sparkled 

3 times alternatively ---> release --->two earbuds are in the situation of paired, and they 

are ready for phone searching. Contact us if you have any question about this.

Answer and Hang up Calls: Press the Right earbud 1 time to answer calls, press the Right earbud

again 1 time to hang up when you finish the talk.  

Start Siri: Long press Right earbud or Left earbud for 1s you will hear “voice dail”, release and 

phone voice ontrol is started. 

Power Off and Pause: Once put the earbuds back to charging case, the earbuds disconnects from phone,

or press either earbuds for 3-5s, the RED lights is on for 1s then power off.  

Thank you for purchasing our product!

Hope you enjoy your new true wireless Bluetooth earbuds.

If you have good experience of this pair of earbuds, we will be appreciated

you can share it to other customers. 

Indicators of earbuds

RED/BLUE

Charging Port

  T6-TWS-IB-180913-B

Front

TWS-T6

(BLE function has been disabled )