GTSYS Limited IRUPOE-07-30DB Manuel D’Utilisation
Quick Reference Guide
2 Installing the IR-U-POE
2.1 Installation pre-requirements
•
PC with a minimum Pentium 4 class CPU
•
Microsoft ® Windows 7, Linux or MAC
•
100 MB available hard drive space
•
Ethernet TCP/IP network with DHCP service
2.2 Software installation
For the reader to work properly, install the programs on your computer before you connect your IR-U-
POE to your computer.
1. Insert the accompanying CD into the CD tray of your computer.
2. Start the APTool.msi program from the CD and follow the instructions in the installation wizard.
3. Make sure your PC is connected to the same network as the Integrated RFID Reader.
4. Install the Integrated RFID Reader to a proper mounting pole and connect the Ethernet
port with the
PoE-Injector. The Injectors data port must connected to the network with DHCP service
available.
Power-up the PoE-Injector.
RFID Reader
Access point
PoE-Injector
PC
(running Windows 7)
Next chapter: 3Start APTool
GTSYS LTD. A01 24/F Golden King Ind. Bld, 35-41 Tai Lin Pai Road, Kwai Chung, HONG KONG SAR - Email: sales@gtsys.com.hk
Copyright © 2014 GTSYS - GTSYS reserves the right to change specifications without prior notice Page 2 / 11