GTSYS Limited IRUPOE-07-30DB Manuel D’Utilisation
Quick Reference Guide
3.2 FCC Approval Frequency Hopping
The APTool allows you test the frequency hopping behavour of the IR-U-POE required for
FCC. In this mode the IR-U-POE change the frequency every >400ms in a range from
FCC. In this mode the IR-U-POE change the frequency every >400ms in a range from
902.75 to 927.25Mhz (channel bandwidth 500Khz) for 50 channels
To proceed with the frequency hopping test:
• Select the tab 'Hopping Test'
• Set the power to maximum (0.72 W)
• Click the 'Start' button to make the IR-U-POE run the test
• Set the power to maximum (0.72 W)
• Click the 'Start' button to make the IR-U-POE run the test
mode.
The carrier indication Icon change from 'Carrier off' to
'Carrier on'
• Click the 'Stop' to stop the test.
• Click the 'Stop' to stop the test.
The carrier indication Icon change from 'Carrier on' to 'Carrier off'
GTSYS LTD. A01 24/F Golden King Ind. Bld, 35-41 Tai Lin Pai Road, Kwai Chung, HONG KONG SAR - Email: sales@gtsys.com.hk
Copyright © 2014 GTSYS - GTSYS reserves the right to change specifications without prior notice Page 5 / 11