GTSYS Limited IRUPOE-12-V3 Manuel D’Utilisation
Quick Reference Guide
2 Installing the IR-U-POEv3/12
2.1 Installation pre-requirements
•
PC with a minimum Pentium 4 class CPU
•
Microsoft ® Windows 7, Linux or MAC
•
100 MB available hard drive space
•
Ethernet TCP/IP network with DHCP service
2.2 Software installation
For the reader to work properly, install the programs on your computer before you connect your Reader to your
computer.
computer.
1. Insert the accompanying CD into the CD tray of your computer.
2. Start the APTool-installer-v3.0.0.exe program from the CD and follow the instructions in the installation
wizard.
3. Make sure your PC is connected to the same network as the Integrated RFID Reader.
4. Install the Integrated RFID Reader to a proper mounting pole and connect the Ethernet port with the
PoE-Injector. The Injectors data port must connected to the network with DHCP service available.
Power-up the PoE-Injector.
Power-up the PoE-Injector.
PC
(running Windows 7)
RFID Reader
Access point
PoE-Injector