Adaptrum Inc ACRS10 Manuel D’Utilisation
5
ACRS 1.0 system must be professionally installed. Please refer to “ACRS 1.0 Professional
Installer Manual” for detailed discussion on hardware installation. After installation, the base station
and client station system configurations are illustrated in the following figures.
and client station system configurations are illustrated in the following figures.
ACRS 1.0
Base Radio
Feed Cable
Antenna
Base Control
PC
Ethernet
Internet
Ethernet
Base station installation diagram.
ACRS 1.0
Client Radio
Feed Cable
Antenna
Client Control
PC
Ethernet
Broadband
Router
Ethernet
Ethernet/WiFi
Client
Devices
Client station installation diagram.
A whitespace communication link is established between the base station and client station
allowing the client side networking devices to connect to the Internet. Multiple client units may connect
to the same base station. From the IP networking perspective, the base station acts like a layer 2 bridge
to the client-side networking devices connected to the client control PC. As shown in Figure 3, both the
base control PC and the client side broadband router will have IP addresses on the hosting subnet.
Multiple client side devices may be visible on the subnet if the broadband router is replaced with a
switch.
to the same base station. From the IP networking perspective, the base station acts like a layer 2 bridge
to the client-side networking devices connected to the client control PC. As shown in Figure 3, both the
base control PC and the client side broadband router will have IP addresses on the hosting subnet.
Multiple client side devices may be visible on the subnet if the broadband router is replaced with a
switch.
Subnet
192.168.0.1
Base PC
Broadband
Router
192.168.0.100
192.168.0.101
Illustration of network topology.
System Operation
Please refer to “ACRS 1.0 Professional Installer Manual” for detailed discussion on hardware and
software installation. Once installed, the main software can be launched on the control PCs through the