Cisco AIR-CAP3502p AIR-CAP3502P-E-K9 Fiche De Données
Codes de produits
AIR-CAP3502P-E-K9
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 6
Item
Specification
External Antenna
(sold separately)
(sold separately)
●
Certified for use with antenna gains up to 13 dBi (2.4 GHz) and 7 dBi (5 GHz).
●
deployment scenarios.
Interfaces
●
10/100/1000BASE-T autosensing (RJ-45)
●
Management console port (RJ-45)
Indicators
●
Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader
errors.
Dimensions (W x L x H)
●
Access point (without mounting bracket): 8.7 x 8.7 x 1.84 in. (22.1 x 22.1 x 4.7 cm)
Weight
●
2.3 lbs (1.04 kg)
Environmental
●
Nonoperating (storage) temperature: -40 to 185°F (-4 0 to 85°C)
●
Operating temperature: -4 to +131°F (-20 to +55°C)
●
Operating humidity: 10 to 90 percent (noncondensing)
System Memory
●
128-MB DRAM
●
32-MB flash
Input Power
Requirements
Requirements
●
AP3500: 44 to 57 VDC
●
Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
Powering Options
●
802.3af Ethernet Switch
●
Cisco AP3500 Power Injectors (AIR-PWRINJ4=)
●
Cisco AP3500 Local Power Supply (AIR-PWR-B=)
Power Draw
●
AP3500: 12.95 W
Note: When deployed using Power over Ethernet (PoE), the power drawn from the power sourcing equipment will be
higher by some amount dependent on the length of the interconnecting cable. This additional power may be as high as
2.45W, bringing the total system power draw (access point + cabling) to 15.4W.
higher by some amount dependent on the length of the interconnecting cable. This additional power may be as high as
2.45W, bringing the total system power draw (access point + cabling) to 15.4W.
Warranty
Limited Lifetime Hardware Warranty
Compliance Standards
●
Safety:
◦
UL 60950-1
◦
CAN/CSA-C22.2 No. 60950-1
◦
UL 2043
◦
IEC 60950-1
◦
EN 60950-1
●
Radio approvals:
◦
FCC Part 15.247, 15.407
◦
RSS-210 (Canada)
◦
EN 300.328, EN 301.893 (Europe)
◦
ARIB-STD 33 (Japan)
◦
ARIB-STD 66 (Japan)
◦
ARIB-STD T71 (Japan)
◦
EMI and susceptibility (Class B)
◦
FCC Part 15.107 and 15.109
◦
ICES-003 (Canada)
◦
VCCI (Japan)
◦
EN 301.489-1 and -17 (Europe)
◦
EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
●
IEEE Standard:
◦
IEEE 802.11a/b/g, IEEE 802.11n 2.0, IEEE 802.11h, IEEE 802.11d
●
Security:
◦
802.11i, Wi-Fi Protected Access 2 (WPA2), WPA
◦
802.1X
◦
Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)
●
EAP Type(s):
◦
Extensible Authentication Protocol-Transport Layer Security (EAP-TLS)
◦
EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
◦
Protected EAP (PEAP) v0 or EAP-MSCHAPv2
◦
Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST)