KEPID AMSTECH CO. LTD. EMU11A Manuel D’Utilisation
2. Installing and Configuring Hardware
-19-
2.3 Installing EMRs and EMG
According to the prepared topology plan, install EMRs near the installed EMUs. Then
install EMG near the monitoring computer.
Figure 2.2 Installation of EMR and EMG
2.4 Connecting EMG to PC
EMG is configured for the MODBUS protocol. When the EMG is turned on, the network
starts building the structure. It may take a while.
For connection between EMG and PC, use the USB cable.
EMG has a USB port on it.
Power connection to
EMR
USB connection to
EMG