AeroAntenna Technology Inc. AT1595-13 Manuel D’Utilisation
AT1595-13/BT1595-13 Aviation Antenna System
Rev 1
22 Sep 2015
1 Introduction & Installation
The AT1595-13/BT1595-13 antenna system is designed to provide Internet
connectivity for General Aviation and Business Aviation markets. The antenna
connectivity for General Aviation and Business Aviation markets. The antenna
system requires professional installation.
2 Safety Information Regarding Exposure to RF Signals
WARNING
To satisfy FCC RF exposure requirements for
mobile transmitting devices, the minimum
safety distance is 1.072 m (3.517 ft). This
safety distance is 1.072 m (3.517 ft). This
separation distance should be maintained
between antenna and people during operation
between antenna and people during operation
of the antenna. During normal operation, the
radiation of the antenna is directed up towards
radiation of the antenna is directed up towards
the sky and only a person on the roof of the
aircraft will be exposed to appreciable
aircraft will be exposed to appreciable
amounts of radiation.
3 Cable Length Requirements
To meet Inmarsat performance requirements and comply with FCC regulations,
care must be taken to use the appropriate total RF cable length. Your antenna
care must be taken to use the appropriate total RF cable length. Your antenna
distributor should provide the appropriate cables.
Cable
Loss requirement
Ref. Cable/Length
SDU* to Bias Box/Amplifier (TX)
1.5 ± 0.2 dB @ 1650 MHz
44 inches RG-316
SDU* to Bias Box/Amplifier (RX)
1.5 ± 0.2 dB @ 1650 MHz
44 inches RG-316
Bias Box/Amplifier to Antenna
4.7 ± 0.2 dB @ 1650 MHz
290 inches RG-142
* SDU = Satellite Data Unit
4 Connection Diagram
Bias Box/Amplifier
Antenna
SDU
TX out
RX in
GPS in
(NMEA)
Airplane Power
(28 VDC nominal)
page 2 of 3
© 2015 AeroAntenna Technology, Inc. All Rights Reserved.
WARNING
1.072 METRES
MICROWAVE RADIATION
MINIMUM SAFE DISTANCE