GoNet Systems Ltd 56-100F-000 Manuel D’Utilisation
GoBeam 5100/6100
Installation Guide
15
4. Insert the four bolts through the bracket and securely
fasten the bracket to the wall.
Mounting the GoBeam 5100/6100 on a horizontal pole
When mounting to a pole, the required mounting adapter is based
on the position of the pole.
on the position of the pole.
Installation on a horizontal pole requires using the ‘L’ adapter.
To mount the GoBeam 5100/6100 unit to a horizontal pole:
1. After assembling the brackets, mount the GoBeam
5100/6100 unit on to the bracket as shown in Figure 6.
Use a flat washer [H], a spring washer [I] and a nut [J].
Use a flat washer [H], a spring washer [I] and a nut [J].
Figure 6. Unit Horizontal Pole Mounting
2. Once the GoBeam 5100/6100 unit is mounted, release the
bolts slightly and adjust the GoBeam 5100/6100 unit to
enhance the coverage and bypass interference. When the
unit is adjusted, firmly close all bolts, applying 120 inch-lbs
of torque.
enhance the coverage and bypass interference. When the
unit is adjusted, firmly close all bolts, applying 120 inch-lbs
of torque.
Mounting the GoBeam 6100 on a vertical pole
Installation on a vertical pole requires the ‘T’ adapter.
To mount the GoBeam 6100 unit on a vertical pole:
1. After assembling the brackets, mount the GoBeam 6100
unit onto the bracket as shown in Figure 6. Use a bolt [F],
flat washer [H], spring washer [I] and nut [J].
flat washer [H], spring washer [I] and nut [J].
Flat Washer
Spring Washer
Nut