Shenzhen Reflying Electronic Co. Ltd. BTS100 Manuel D’Utilisation
Bluetooth speaker
Manual: (double print)
4. Application
5. Troubleshooting
Applicable to all Bluetooth devices.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation.
the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment
and receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment
and receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
1
2
3
4
5
6
User Manual
①
Hands-free call is only available when Bluetooth is
connected. The phone call can be interfered with by
high frequency electromagnetism, users should avoid
if possible.
②
high frequency electromagnetism, users should avoid
if possible.
②
Bluetooth is a bidirectional transmitting protocol;
transmitting distance is highly related to audio player.
Compatible Bluetooth players are recommended.
③
Compatible Bluetooth players are recommended.
③
Some terminal players are without automatically
switching play function. In this case, POP noise will
exist in the interval of every 2 songs.
exist in the interval of every 2 songs.
6. Accessories:
USB charging cable, Audio cable,2 pieces;
User manual, 1 piece.
User manual, 1 piece.
④
When Bluetooth transmitting devices cannot be
connected, a possible solution is to delete the
Bluetooth device name from the list, turn off
Bluetooth on the device, turn back on, re-discover
the device, and pair again.
⑤
Bluetooth device name from the list, turn off
Bluetooth on the device, turn back on, re-discover
the device, and pair again.
⑤
The sound performance could also be affected
when BT transmitting devices is under poor signal
environment, or under low battery capacity.
environment, or under low battery capacity.
General Micro USB port
Laser printing top button, Classic blue light
Air ducting hole
Anti-skid Silicon Pad
Wireless Bluetooth transmission for mobile phone,
laptop, ipad, etc
Laser printing top button, Classic blue light
Air ducting hole
Anti-skid Silicon Pad
Wireless Bluetooth transmission for mobile phone,
laptop, ipad, etc
①
Activate Computer’s Bluetooth (if the computer
does not have built-in Bluetooth, plug in a Bluetooth
adapter) – Turn speaker to pairing mode (Blue light
flashing quickly) – Search Bluetooth speaker –Paring
– Connect and Play
②
adapter) – Turn speaker to pairing mode (Blue light
flashing quickly) – Search Bluetooth speaker –Paring
– Connect and Play
②
Connect your computer and the HEX speaker via
3.5mm audio cable
2. Structure
1. Micro USB: Charging port;
2. 3.5mm Audio port;
3. Power switch: Switch on/off;
4. Mic: Serve as microphone during hands-free call;
5. Answer / hang up the phone call under Bluetooth
mode;
6. LED Indicator: Built-in battery indicator,Red light
on - In charging.
2. 3.5mm Audio port;
3. Power switch: Switch on/off;
4. Mic: Serve as microphone during hands-free call;
5. Answer / hang up the phone call under Bluetooth
mode;
6. LED Indicator: Built-in battery indicator,Red light
on - In charging.
3. Usage
Important – Verify that the speaker is turned
on and charged.
Play via Computer:
Important – Verify that the speaker is turned
on and charged.
Play via Computer:
Product Name: HEX
Product Type: Bluetooth Speaker
Size & Weight:74*74*65mm;176.8g
Material：100% ROHS PC & ABS
S/N & Distortion Ratio:≥85db;≤0.5%
Frequency Response:100HZ-- 20KHZ
Output Power: RMS 3.0 watt
Battery:3.7V/500MA
Speaker Spec.:40mm 3W/2.8Ω
Advanced Bluetooth 3.0 (up to 10 meters range)
Built-in Li-polymer battery with 500mah
Up to 4-6 hours playing time
Product Type: Bluetooth Speaker
Size & Weight:74*74*65mm;176.8g
Material：100% ROHS PC & ABS
S/N & Distortion Ratio:≥85db;≤0.5%
Frequency Response:100HZ-- 20KHZ
Output Power: RMS 3.0 watt
Battery:3.7V/500MA
Speaker Spec.:40mm 3W/2.8Ω
Advanced Bluetooth 3.0 (up to 10 meters range)
Built-in Li-polymer battery with 500mah
Up to 4-6 hours playing time
1. Description
Play via Mobile phone:
①
Activate Mobile phone’s Bluetooth – Search BT
speaker – Find HX-BTS100 –Paring – Connect and
Play
②
Play
②
Connect your mobile phone and the HEX speaker
via 3.5mm audio cable
size:250x50mm
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
RoHS
Made in China
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
WARNING: This product contains chemicals known to
the State of California to cause cancer, birth defects
and other reproductive harm