Shenzhen Reflying Electronic Co. Ltd. RF32 Manuel D’Utilisation

Thank you for purchasing the Mini Portable Bluetooth® Speaker. It pairs easily 

with phones, media players, tablets, laptops and other devices equipped with 

wireless Bluetooth® capabilities. Its neodymium driver generates impressive 

audio power and its 320mAh lithium-polymer battery can provide up to four 

hours or more of wireless playtime. Perfectly portable, it can receive your 

device's Bluetooth® audio signal from up to 32 feet (10 meters) away. It sup-

ports devices with A2DP (Advanced Audio Distribution Profile) and AVRCP 

(Audio/Video Remote Control Profile) and can also be used as a wireless 

speakerphone for compatible mobile phones.

Before using your Mini Portable Bluetooth® Speaker for the first time, please 

read these instructions carefully. You will need to completely charge the 

built-in battery before using the speaker for the first time. See “Charging the 

speaker” below.

Mini Portable Bluetooth® Speaker with built-in lithium-polymer battery

3.5mm aux-in audio cable

USB type 'A' male to Micro-USB male cable

This user manual

Play/pause button (“ ▶ ∥ ”)

In music playback mode, pressing this button will pause playback. Press it 

again to resume playback.

In speakerphone mode, a quick press of this button will answer the call. 

Another quick press will disconnect the call. Quickly pressing the play/pause 

button twice will recall the last number called.

Previous track/decrease volume button (“-”)

Press this button quickly to jump playback to the start of the previous audio track.

Hold this button down to decrease playback volume.

Next track/increase volume button (“+”)

Press this button quickly to jump playback to the start of the next audio track.

Hold this button down to increase playback volume.

Before using, you must first pair the Mini Portable Bluetooth® Speaker to your 

Bluetooth®-equipped device. To pair the device, first slide the power switch to 

“on.” The status indicator should blink rapidly with both blue and red lights. 

(If nothing happens, see “Charging” below.)

Use your device's Bluetooth® menu to activate device searching. The menu 

might say “Search for new devices,” but the exact wording may vary. Once you 

have begun searching, the device name “Mini Bluetooth Speaker” should ap-

pear in the menu. Choose to pair with the “Mini Bluetooth Speaker” speaker 

and, when prompted, enter the password “0000” (four zeros).

If the pair is successful, the status indicator should change to a gently blinking 

blue light. If the pair is not successful, slide the power switch to “off,” then 

back to “on,” and retry the pairing process.

You can also connect a non-Bluetooth® audio device (like an MP3 player 

or CD player) to your speaker using the included aux-in audio cable. Just 

connect the cable (or a similar 3.5mm audio cable) to your audio device and 

to the Mini Portable Bluetooth® Speaker's aux-in audio port. When a cable is 

connected to the aux-in audio port, the Bluetooth® features will not operate. 
Disconnect the cable to reactivate the Bluetooth® features.

When you use the Mini Portable Bluetooth® Speaker as a Bluetooth®-

connected audio output device, you can control playback from the speaker 

or your device. Press the previous/next track buttons (“-”, “+”) to skip tracks, 

use the play/pause button (“ ▶ ∥ ”) to pause and resume playback, or change 

the volume by holding down the decrease/increase volume buttons (“-”, “+”). 

Please note, these buttons will have no effect when you are using the aux-in 

audio port.

If your Bluetooth® device can receive phone calls, your ringtone may inter-

rupt your music playback and be heard from the Mini Portable Bluetooth® 

Speaker. You can use the speaker to accept calls; a quick press of the play/

pause button (“ ▶ ∥ ”) will connect the call to the speakerphone. Another