Orion Electric Co Ltd M2D8A Manuel D’Utilisation
17
Push the center of the tape until it is automatically retracted
into the TV/VCR.
into the TV/VCR.
Automatic power on and play
When loading a cassette tape without the erase prevention
tab intact, the TV/VCR will turn on automatically
and playback will start immediately.
tab intact, the TV/VCR will turn on automatically
and playback will start immediately.
Insert the cassette with its labeled side facing you.
An inverted video cassette cannot be inserted.
An inverted video cassette cannot be inserted.
Use only video cassette tapes marked
.
Loading
To unload a video cassette, press EJECT on the remote
control, or press STOP/EJECT on the TV/VCR twice.
The first press will stop the tape in any mode. The second
press will eject the tape.
control, or press STOP/EJECT on the TV/VCR twice.
The first press will stop the tape in any mode. The second
press will eject the tape.
Unloading
Automatic eject
If the TV/VCR automatically rewinds the tape to the
beginning (AUTO REWIND FEATURE), the tape will
be ejected automatically.
beginning (AUTO REWIND FEATURE), the tape will
be ejected automatically.
NOTES:
• Always eject the tape when not in use.
• The cassette tape can be ejected even if the POWER is
• Always eject the tape when not in use.
• The cassette tape can be ejected even if the POWER is
“OFF”.
After recording, break off the erase prevention tab if
you do not wish to record over the tape.
you do not wish to record over the tape.
To prevent accidental erasure
Erase prevention tab
Screwdriver
Cover the hole with adhesive tape.
Be careful the tape does not extend past the edges of the
video cassette housing.
Be careful the tape does not extend past the edges of the
video cassette housing.
To record again
Adhesive tape
NOTE:
This TV/VCR selects the playback tape speed SP, LP or SLP
automatically.
This TV/VCR selects the playback tape speed SP, LP or SLP
automatically.
Load a prerecorded tape (When loading a cassette tape
without the erase prevention tab, playback will start auto-
matically).
without the erase prevention tab, playback will start auto-
matically).
To start playback
Press PLAY to begin playback.
“
” will appear on the screen.
Press STOP once.
The tape will stop, but remain fully loaded and ready to play.
“
The tape will stop, but remain fully loaded and ready to play.
“
” will appear on the screen.
To stop playback
Press REW or F.FWD in the Stop mode.
“
” or “
” will appear on the screen.
FORWARD/REVERSE PICTURE SEARCH
If you want to see the tape during REW or FWD mode, press
and hold the REW or F.FWD. The backward or forward
visual search picture will be seen on the screen. Release to
return to the REW or FWD mode.
If you want to see the tape during REW or FWD mode, press
and hold the REW or F.FWD. The backward or forward
visual search picture will be seen on the screen. Release to
return to the REW or FWD mode.
To rewind or forward the tape rapidly
Loading and Unloading a cassette tape
Cassette tape playback
Video cassette tape
Tape Speed
SLP (Super Long Play)
T-160
T-120
T-60
2-2/3 hours
2 hours
1 hour
8 hours
6 hours
3 hours
SP (Standard Play)
Reverse picture search function
Press REW x 1 or x 2 during the playback.
Press REW x 1 or x 2 during the playback.
Picture Search
Forward picture search function
Press F.FWD x 1 or x 2 during the playback.
To return to playback: Press PLAY.
Press F.FWD x 1 or x 2 during the playback.
To return to playback: Press PLAY.
Still Picture
Press PAUSE during playback. To resume normal playback:
Press PLAY.
Press PLAY.
PICTURE SEARCH SPEED
PRESS TWICE
TAPE SPEED
PRESS ONCE
SP (Standard Play)
LP (Long Play)
SLP (Super Long Play)
5 X
9 X
15 X
3 X
7 X
9 X
SPEED SEARCH TIMES
Special playback
2D80401A[E](10-17)
4/27/04, 1:35 PM
17