Orion Electric Co Ltd M4F2B Manuel D’Utilisation

Page de 51
48
1
NOTES:
It is recommended that you set the SPEED to the SP mode on the recording VCR for best results.
Unauthorized recording of copyrighted television programs, films, video tapes and other materials may
infringe on the rights of copyright owners and violate copyright laws.
Load a blank cassette tape with the erase
prevention tab intact into the recording VCR.
Load a previously recorded tape into the
playback VCR or CAMCORDER.
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
3
5
4
2
AUDIO/VIDEO
Cord 
(Not supplied)
If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape. Make all
connections before turning on the power.
Press the INPUT SELECT button twice to
select AUDIO/VIDEO input position. "LINE"
will appear on the screen.
To AUDIO (L) IN
To AUDIO (L) OUT
AUDIO/VIDEO Cord (Not supplied)
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Recording VCR
To AV Jack
Press the REC/OTR button
on the recording VCR, then
press the PAUSE/STILL
button.
Press the PLAY button on the
playback VCR, then press the
PAUSE/STILL button.
Press the PAUSE/STILL
button on both the VCRs
simultaneously to begin the
duplicating process.
DUPLICATING A VIDEO TAPE
PAUSE/
STILL
PLAY
PAUSE/STILL
REC/OTR
PAUSE/
STILL
PAUSE/STILL
Playback Camcorder
Playback VCR
To VIDEO OUT
To AUDIO (R) OUT
Recording VCR
To VIDEO IN
To AUDIO (R) IN
LINE
        SELECT
INPUT
  4C94001A/E/P44-49
08*12*99, 11:35
48