Bose Corporation 410633 Manuel D’Utilisation

English – 17

ARE

AND

AINTENANCE

Updating system software

Software updates sometimes become available to improve the performance of your
system. The following is the preferred method for installing software updates.

Note:

For another software update method, see “Alternate update method” on page 18.

Software update procedure

1. Make sure your SoundLink Air system is connected to your Wi-Fi

network and that

there is an Internet connection. The front panel Wi-Fi indicator (

) should be solid

blue.

2. On the remote, press and hold Mute for 10 seconds while watching the front panel

Wi-Fi indicator.

• If the Wi-Fi indicator double-blinks green twice, you can release the Mute button:

The system software is up to date and the system returns to the previous operating
mode.

• If the Wi-Fi indicator starts quickly blinking green, release the Mute button:

A software update is necessary and the software starts downloading. The Wi-Fi
indicator continues blinking until the download is finished. While the software
update is installed, the Wi-Fi indicator glows solid green for three seconds followed
by a double blink. This pattern repeats until the installation is finished. At the end of
the installation, the system emits a tone and automatically restarts. After restart,
the system will automatically connect to your Wi-Fi network again.

CAUTION: Do not remove power from the SoundLink Air system while updating the system
software.

Note:

If the Wi-Fi indicator starts blinking red, a system error has occurred. Contact Bose Customer

Service for assistance.

AUX

Whippet_OG.book Page 17 Wednesday, May 16, 2012 3:51 PM