RadioShack Corporation 2101849 Manuel D’Utilisation
DRAFT OF BLISTER CARD OF 21-1849
March 13, 2002
Prepared By Headline I & C Ltd.,
Prepared By Headline I & C Ltd.,
These radios make keeping in touch fun and easy. Whether playing inside or outdoors, these
license-free, 2way radios fit nicely in the palm of your hand. You can talk to your friends in the
next room, next door and around the neighborhood. Use them at shopping malls, amusement
parks or sports events to stay in touch with family and friends. These cool radios feature “auto-
squelch”, which means you will not hear anything on the channel unless someone is transmitting
nearby on the same channel. The radio automatically switches to sleep mode if not used for six
seconds, and wakes up when it receives a transmission or you press any key.
license-free, 2way radios fit nicely in the palm of your hand. You can talk to your friends in the
next room, next door and around the neighborhood. Use them at shopping malls, amusement
parks or sports events to stay in touch with family and friends. These cool radios feature “auto-
squelch”, which means you will not hear anything on the channel unless someone is transmitting
nearby on the same channel. The radio automatically switches to sleep mode if not used for six
seconds, and wakes up when it receives a transmission or you press any key.
Installing batteries,
Your radio uses three “AAA” batteries for power, For the best performance, we recommend
RadioShack alkaline batteries.
Note ; You can also use NI-CD/Ni-MH rechargeable batteries in the radio and recharge them,
using a separate battery charger, available at your local RadioShack store.
Your radio uses three “AAA” batteries for power, For the best performance, we recommend
RadioShack alkaline batteries.
Note ; You can also use NI-CD/Ni-MH rechargeable batteries in the radio and recharge them,
using a separate battery charger, available at your local RadioShack store.
1. The way to exist the menu, a) when press PTT button b) when press Call button c) when no
button touching for 30 seconds d) when go through the end of the menu.
2. Install the batteries, matching the polarity symbols(+ and -) inside.
3. Replace the cover
3. Replace the cover
The radio’s range decreases as the battery power decreases, To ensure maximum range, keep
fresh batteries in the radio.
fresh batteries in the radio.
WARNING : Dispose of old batteries promptly and properly. Do not burn or bury them.
CAUTION : Do not mix old and new batteries, different types of batteries(standard, alkaline or
rechargeable) or rechargeable batteries of different capacities.
CAUTION : Do not mix old and new batteries, different types of batteries(standard, alkaline or
rechargeable) or rechargeable batteries of different capacities.
Using the radio
1. To turn on the radio, press power button for 2 seconds
2. Adjust the volume to the desired listening level by pressing up/down button.
3. To enter to the memu mode and select CH, press Mode button once and then press
2. Adjust the volume to the desired listening level by pressing up/down button.
3. To enter to the memu mode and select CH, press Mode button once and then press
up/down button for the channel you want.
4. To make the melody ON or OFF, press Mode button two times and then press up/down
button.
5. To make confirmation tone ON or OFF, press Mode button three times and then press
up/down button.
6. To talk, hold down PTT. When the TX/BATT indicator lights, speak in to the microphone.
Note : If Low Battery blinks when PTT is not held down, replace the batteries.
When you finish speaking, release PTT.
Talk confirmation
You can set the radio so a confirmation tone sounds when you release PTT. The tone alerts
another person you are talking to that you have finished talking.
You can set the radio so a confirmation tone sounds when you release PTT. The tone alerts
another person you are talking to that you have finished talking.
The belt clip
To attach the belt clip, slide it down until it locks into place. To remove the belt clip, pull the tab
and slide the belt clip up.
Using a wrist strap
You can attach an optional wrist strap or pager chain(neither supplied) to the wrist strap hole
To attach the belt clip, slide it down until it locks into place. To remove the belt clip, pull the tab
and slide the belt clip up.
Using a wrist strap
You can attach an optional wrist strap or pager chain(neither supplied) to the wrist strap hole