Motorola Solutions Inc. 99FT5101 Manuel D’Utilisation
MN002253A01-AD
7
MOTOTRBO SLR 8000 Base Station/Repeater Supplemental Safety and Installation Requirements
Notice
MOTOTRBO SLR 8000 Base Station/
Repeater Supplemental Safety and
Installation Requirements
Repeater Supplemental Safety and
Installation Requirements
IMPORTANT:
• The MOTOTRBO SLR 8000 Base Station/Repeater must be installed in a suitable, in-
building enclosure. A restricted access location is required when installing this equipment
into the end system.
into the end system.
• The base station/repeater contains a Class 1 built-in power supply component. It is equipped
with an appliance inlet for connecting to an AC input, as well as DC input terminals which
meet SELV DC circuit requirements.
meet SELV DC circuit requirements.
• When installing the equipment, all requirements of relevant standards and local electrical
codes must be fulfilled.
• The maximum operating ambient temperature of this equipment is 60 °C. The maximum
operating altitude is 5000 meters above sea level.
• The 15.75 VDC output from the power supply to the PA is at an energy hazard level
(exceeds 240 VA). When installing into the end system, care must be taken so as not to
touch the output wires.
touch the output wires.
• When the SLR 8000 Base Station/Repeater is used in a DC reverting system, the DC power
supply must be located in the same building as the MOTOTRBO SLR 8000 Base Station/
Repeater, and it must meet the requirements of a SELV circuit.
Repeater, and it must meet the requirements of a SELV circuit.