Arris WA840G Manuel D’Utilisation
SECTION 1
OVERVIEW
1-10 SECTION
1,
OVERVIEW
LED Description
The underlined items represent network activity.
LED
Condition
Color
Status
1 Power
ON
Green
The device is powered on and operating normally.
Blinking
Green
Firmware update is in progress.
Blinking/ON
Red
The power LED turns RED as soon as the reset
button is depressed. If the reset button is held down
for more than 5 seconds, the LED starts to blink
during which the access point’s default user name,
password and IP address will be restored. The LED
then turns OFF until the reset button is released. The
power LED keeps blinking RED if the firmware is
corrupted indicating the firmware needs to be
restored.
button is depressed. If the reset button is held down
for more than 5 seconds, the LED starts to blink
during which the access point’s default user name,
password and IP address will be restored. The LED
then turns OFF until the reset button is released. The
power LED keeps blinking RED if the firmware is
corrupted indicating the firmware needs to be
restored.
2 Wireless OFF
None
No mobile station or AP has associated with this
device.
device.
ON
Red
The wireless interface has been disabled by the
firmware.
firmware.
ON/Blinking
Green
802.11b/802.11g connection exists in this wireless
domain/active traffic present.
domain/active traffic present.
3 Device
OFF
None
No external Ethernet device has been attached and
detected. The Ethernet link is down.
detected. The Ethernet link is down.
ON/Blinking
Amber
10BaseT link detected/active traffic present.
ON/Blinking
Green
100BaseT link detected/active traffic present.