Arris WA840G Manuel D’Utilisation
SECTION 2
INSTALLATION
2-8
SECTION 2, INSTALLATION
Wireless Connection to Access Point
WARNING!
Initial configuration of the Access Point with a wireless
connection is NOT secure and is not recommended by
Motorola. If at all possible, for an initial configuration,
use an Ethernet cable to connect to the AP.
connection is NOT secure and is not recommended by
Motorola. If at all possible, for an initial configuration,
use an Ethernet cable to connect to the AP.
LAN
Antenna
Reset
Power
If you are connecting your client (most likely a PC) wirelessly to the
AP, you can use the Motorola WPCI810G, a wireless PCI card for
your desktop PC. If you have a laptop, the Motorola WN825G
wireless PC card provides access.
The WN825G and WPCI810G are not supported under Windows 95, 98, nor NT.
AP, you can use the Motorola WPCI810G, a wireless PCI card for
your desktop PC. If you have a laptop, the Motorola WN825G
wireless PC card provides access.
The WN825G and WPCI810G are not supported under Windows 95, 98, nor NT.
Windows 98SE, ME, 2000, and XP are supported.
1 To connect the PC to the AP through a wireless connection,
1 To connect the PC to the AP through a wireless connection,
ensure the PC’s wireless adapter SSID (Service Set Identifier) is
set to the AP’s default setting of motorola appended with the last
3 characters of the Wireless MAC address (an example SSID:
motorola 345) and that no encryption is enabled.
set to the AP’s default setting of motorola appended with the last
3 characters of the Wireless MAC address (an example SSID:
motorola 345) and that no encryption is enabled.