Napco Security Technologies ALPIE Manuel D’Utilisation

1 

 The 

Trilogy 

Networx

™

  AL-IME2-PIE  Plug-in Expander 

greatly extends the coverage area of version 2 series 
Gateways.  The AL-IME2-PIE is a 
"plug-in" version of the AL-IME2-EXP 
Expander; both models are functional-
ly identical.  Installation is simple, with 
the AL-IME2-PIE only requiring a con-
nection to a standard 120VAC wall 
outlet, . 

  AL-IME2-PIE Expanders are cost-

effective, require no wiring, and fea-
ture a simplified 'Plug and Play' setup 
where the Networx system automati-
cally  identifies all newly powered Ex-
panders and quickly determines the 
best wireless signal pathways.  Up to 
7 Expanders can be added to one ver-
sion 2 series Gateway.   

 

  Why use AL-IME2-PIE Expanders? 



Less costly, Expanders allow large coverage areas 
without using additional Gateways 



Does not require network access / Ethernet cables 



Can be added to existing systems to improve sig-
nal strength in weak signal areas  



Allows for greater flexibility when positioning ver-
sion 2 Gateways 



Allows large area signal coverage with a single net-
work connection to the Gateway 

  Note:   Expanders are available in two different de-

signs:  The AL-IME2-PIE Plug-In Expander and the AL
-IME2-EXP  Expander  (identical in operation; see 
WI2156 for more information).  

 

 The 

AL-IME2-PIE "version 2" Expanders (notice the 

"2" in the model name) are the next generation of Net-
worx wireless devices.  Because AL-IME2-PIE Ex-
panders only work with version 2 Gateways, a version 
2 Gateway must be installed and operational in your 
system for AL-IME2-PIE Expanders to function (AL-
IME2-PIE Expanders cannot communicate with old-
er "non-version 2" Gateways). 

  Note:  Although the version 2 Gateways and AL-

IME2-PIE Expanders CAN be mixed into an existing 
system that includes older "non-version 2" Gateways, 

© ALARM LOCK 2018 

WI2219BLF  6/18 

at least one new version 2 Gateway must be up and 
running before an AL-IME2-PIE Plug-In Expander can 
be used.   

  IMPORTANT:  DL-Windows version 5.4.2 or later is 

required to support version 2 Gateways and Expanders.  
The  AL-IME2-PIE  Plug-In Expander is compatible with 
Alarm Lock and Continental Access products.  Refer to 
the documentation supplied with your software for inte-
gration details.   

 

Note:   Actual range varies with building construc-
tion.   



Gateway/Expander to Locks:  Clear field range 500'. 



Typical indoor range: Networx 75-175'; ArchiTech 
Networx: 50-125'.   



Gateway/Expander to Expander:  Clear field range 
500'.  Typical indoor range, 75- 175'.   

 



902 - 928MHz 



13.5mW typical RF power 

 



Input Voltage:  120VAC @ 60Hz 



Peak Supply Current:  10mA  



Occupies one 120VAC outlet  

 



Operating Temperature:  -20˚ to 60˚C (-4˚ to 140˚F) 



Storage Temperature:  -40˚ to 85˚C (-40˚ to 185˚F) 

 



Enclosure Size:  4.3"H x 2.5"W x 0.875"D, (5"H with 
Mounting Tab) 



Weight:  0.35lbs. 

 

  Once your version 2 Gateway location has been select-

ed, the next step is to determine where to install Ex-
panders.  However, the following must be taken into 
consideration:   

 



Although wood and wallboard construction can have 
little effect upon signal strength, concrete or brick can 
reduce signal strength by up to 35%.  Steel-reinforced 
concrete or metal lath and plaster can reduce signal 
strength as much as 90%! 

345 Bayview Avenue 

Amityville, New York 11701 

For Sales and Repairs 1-800-ALA-LOCK 

For Technical Service 1-800-645-9440  

or visit us at 

(Note:  Technical Service is for security professionals only) 

Publicly traded on NASDAQ    Symbol: NSSC