Furuno USA Inc 9ZWRTR065 Manuel D’Utilisation

The fuse in the power cable protects the
equipment against reverse polarity of ship’s
mains, overcurrent, and equipment fault. If
the fuse blows, find the cause before
replacing it. Never use an incorrect fuse–
serious damage to equipment may result
and void the warranty.

24/32 VDC

:5 A fuse

12 VDC

:10 A fuse

Table 4-2 contains simple troubleshooting
procedures which you can follow to try to
restore normal operation. If you cannot
restore normal operation, do not attempt to
check inside any unit of the radar system.
Any repair work is best left to a qualified
technician.

you pressed the 
[POWER] key to 
turn on the radar

the radar has 
warmed up and you 
pressed the 
[ST-BYTX] key to 
transmit

you have adjusted
the gain with FTC
and STC off

a key is pressed

the control panel does not 
light

nothing appears on the 
display or display contrast 
is poor

characters are distorted

the antenna does not 
rotate

characters and indications 
are abnormal

neither noise nor targets 
appear (indications and 
markers do)

neither indications nor 
markers appear
(noise and targets do)

the sweep (radial line 
sweeping around the 
display) is not 
synchronized with 
antenna rotation

there is no change in 
sensitivity.

nothing happens

try adjusting the  control panel backlighting 
on the Brilliance/Backlighting menu.
battery may have discharged.
check fuse in power cable.

try adjusting the tone.
(Extreme ambient temperature may affect 
display tone.)

request service.

the problem may be in antenna unit.
Request service.

have a qualified technician check the set.

check signal cable for damage.

check signal cable for damage.

the problem may be in the antenna unit. 
Request service.

request service.

key may be faulty. Request service.