Bionime Corporation GM782 Manuel D’Utilisation

37

36

If your blood glucose result is unusually high or low, or if you question your test results, repeat the 
test with a new 

 Blood Glucose Test Strip GS700.

You can also run a Quality Control Test with the 

 Control Solutions GC700  to check your 

 Blood Glucose Meter

 and 

Blood Glucose Test Strip GS700 (Refer to 

“Performing a Quality Control Test” on page 40) .

If the test result still remains unusually high or low, contact your healthcare professional 
immediately.

If you are experiencing symptoms that are not consistent with your blood glucose test results and 
you have made sure to follow all instructions in this manual, contact your healthcare professional 
immediately.

Follow local regulations or consult your health care provider for appropriate disposal of used test
strips and lancets.

 Rightest

 Rightest

 

 

 

GM782

 

Make sure your blood sample covers the 
whole area of the view window to get an 
accurate test result. An insufficient blood 
sample will result in an error message 
("Er4"). If this occurs, repeat the test with a 
new test strip.

 Insufficient blood sample

 Sufficient blood sample

CAUTION
- Check the expiration date printed on the strip vial every time you use a test strip. Do not use 

expired 

 Blood Glucose Test Strips GS700.

- Use each 

 Blood Glucose Test Strip 

 immediately after removing it from 

the vial.

- Do not reuse 

 Blood Glucose Test Strips 

.

- 

- Apply the blood sample only on the sample port of the test strip.

GS700

GS700

Do not perform testing immediately after moving from one ambient temperature to another 

(e.g. after coming indoors from the outside). Allow 30 minutes for the temperature of the 
meter and the test strips to equilibrate.