General Research of Electronics Inc 0602902 Manuel D’Utilisation
When enabled, shows the Talkgroup ID for P25 Conventional
Talkgroup calls. Simple Display must be unchecked.
Talkgroup calls. Simple Display must be unchecked.
CONV Radio ID
When enabled, shows the Radio ID for P25 conventional calls.
Simple Display must be unchecked.
Simple Display must be unchecked.
PC/IF CCDump
When enabled, streams ASCII Control Channel Dump data over
the USB interface when the radio is tuned to a trunking control
channel.
the USB interface when the radio is tuned to a trunking control
channel.
Low Batt Time
Sets the interval for the audible low battery warning.
Charge Time
Sets the charge time for the built-in radio charger.
TG Disp
Sets the display format for talkgroup IDs.
M36 Status Bits
When enabled, the radio will track Motorola 3600 baud trunking
talkgroup calls using status bits. When disabled, status bits are
ignored.
talkgroup calls using status bits. When disabled, status bits are
ignored.
Bandplan
Selects USA or Canada search frequency steps in VHF and UHF
bands. Imported frequencies will use the bandplan obtained from
the Library.
bands. Imported frequencies will use the bandplan obtained from
the Library.
EncMode
Selects how the radio treats encrypted voice calls. “Noise” plays
the random undecoded encryption noise. “Silent” plays no audio
during the call. “Tone” plays a soft tone for the duration of the
call.
the random undecoded encryption noise. “Silent” plays no audio
during the call. “Tone” plays a soft tone for the duration of the
call.
EncLevel
Selects the tone level for tones played during encrypted calls.
IF Out
When enabled, routes the IF (discriminator) signal to the radioʼs
headphone connector for use by external decoding software
applications. When HP is selected, the IF signal will be present
headphone connector for use by external decoding software
applications. When HP is selected, the IF signal will be present
PSR-800 User Manual!
Page 72