StarTech PM1115UW Manuel D’Utilisation
Instruction Manual
4
Default Settings
Username: admin
Password: (None)
Wireless Mode: Ad-Hoc (Peer-to-Peer)
SSID: PM1115UW
IP Address: 192.168.0.10
Username: admin
Password: (None)
Wireless Mode: Ad-Hoc (Peer-to-Peer)
SSID: PM1115UW
IP Address: 192.168.0.10
Installation
Hardware Installation
1. Turn off the power to your printer.
2. Connect the print server to your printer with the appropriate printer cable.
3. Turn the printer on.
4. Plug in the AC power adapter into the DC jack on the print server.
5. Wait ~40 seconds for the print server’s Power On Self Test (POST) to complete.
6. (Optional) Connect an RJ45 network cable to the print server, then to your network
2. Connect the print server to your printer with the appropriate printer cable.
3. Turn the printer on.
4. Plug in the AC power adapter into the DC jack on the print server.
5. Wait ~40 seconds for the print server’s Power On Self Test (POST) to complete.
6. (Optional) Connect an RJ45 network cable to the print server, then to your network
switch or wall jack.
Software Installation
For full operating instructions and specifications, please visit www.startech.com/
PM1115UW
Windows
1. Find the wireless print server by viewing your available wireless networks and
Windows
1. Find the wireless print server by viewing your available wireless networks and
connecting to the PM1115UW SSID.