Rigado Inc. SCS-001 Manuel D’Utilisation
Rigado
SCS-001
U
SER
G
UIDE
Project / Subproject:
SCS-001
Reference Number / Version:
0.2
Issue Date:
4/21/2015
Document File Name:
SCS-001_User_Guide.docx
Page:
11 of 11
3.6 Enable Characteristic (b7717580-b82a-4502-bd90-7f703fba1324)
The enable characteristic is used to enable the beacon service to advertise. To enable or disable to the beacon
select use the slide button. Once enabled, the beacon will start advertising after you exit the BMDware
Configuration page. In the case of another application once the Beacon configuration service is disconnected, the
beacon will being advertising. Figure 7 shows examples of the beacon enable characteristic.
select use the slide button. Once enabled, the beacon will start advertising after you exit the BMDware
Configuration page. In the case of another application once the Beacon configuration service is disconnected, the
beacon will being advertising. Figure 7 shows examples of the beacon enable characteristic.
Figure 7: Beacon disabled (left). Beacon enabled (right).
Characteristic UUID
Length
Disable Value
Enable Value
b7717580-b82a-4502-bd90-7f703fba1324 1 Bytes
0
1
Figure 8: Beacon Enable Characteristic information
After enabling the beacon in the beacon configuration service, exit the beacon configuration service to start beacon
advertisement. In the BMDware Home page you will now see a new “Unknown” device advertising. This
unknown device will be the beacon (non-connectable).
advertisement. In the BMDware Home page you will now see a new “Unknown” device advertising. This
unknown device will be the beacon (non-connectable).
Figure 8: Beacon enabled and advertising