Sony Engineering Corporation FFS-T Manuel D’Utilisation
Settings
The settings screen is displayed on the display panel when the
product is turned on.
product is turned on.
Display panel
Default setting values are shown below.
Page 1
Page 1
Carrier wave
: 033/005
Freq Pattern
: A
Ctrl NodeID
: 0001
Node Class
: 2
Page 2
DMX cntrl CH
: 001
DMX FREE CH : 002
DMX Rand CH : 003
DMX Node3 CH : 004
Page 3
DMX channel
: 005-034
Auto Scan
: OFF
RF Power
: 0
TX Delay
: 0x10ms
Page 4
Refresh time
: 0.5SEC
B-Cast cntl
: ON
Div ANT
: 3
ID Count
: 5
Page 5
Field Test
: OFF
To Change Settings
Up button
Enter button
Right button
Left button
Down button
Press the up or down button to select the setting item you
want to change.
If you press the down button while the cursor is on the
bottom item, the next page will be displayed. If you press
the up button while on the top item, the previous page will
be displayed.
bottom item, the next page will be displayed. If you press
the up button while on the top item, the previous page will
be displayed.
Press the left or right button to change the setting value.
Press the enter button to finalize the setting.
Press the enter button to finalize the setting.
Setting values are not actually changed until you press the
enter button, even when the values are shown on the
display as having been changed.
enter button, even when the values are shown on the
display as having been changed.
Specifications
Power output: 0.32 mW
Operating frequency: 922.4 MHz - 926.4 MHz
Active channel: 1
Operation mode: GFSK
Data rate: 80 kbps
Antenna cable length: 3 m
Use: Wireless control of LED lighting devices
Antenna connector/Gain: SMA (reverse polarity)
Materials: Urethane
MADE IN JAPAN
FreFlow® and its logo are trademarks or registered trademarks of
Sony Engineering Corporation.
Sony Engineering Corporation.