IDEAL INDUSTRIES SCELV1000 Manuel D’Utilisation
Product Manual
SCELV1000-277 – Electronic Low Voltage Luminaire Controller
ND xxxx-1 01/2016
Users Manual – SCELV1000-277 Downlight/LED Smart
Connector
Page 3
www.idealindustries.com
LOAD
The LOAD(red) and Neutral(White) wire are 18 AWG solid copper conductors.
1.
Strip wires to 1/2”.
2.
Connect Smart Connector LOAD wire to the ballast hot line with appropriate sized wirenut or
push-in connector if necessary.
3. Connect Smart Connector NEUTRAL Output to the ballast neutral with appropriately sized
wirenut or push-in connector if necessary.
4.
For feed-through (i.e., “daisy-chain”) installations, connect the LOAD hot feed-through
conductor into the wirenut in step 2. Also, connect the NEUTRAL Output feed-through
conductor into the wirenut in step 3.
conductor into the wirenut in step 3.
PROGRAMMING
Refer to the Audacy™ system configuration manual to associate smart connectors to other
devices and to set up operating parameters for the Audacy™ lighting control system
devices and to set up operating parameters for the Audacy™ lighting control system
SPECIFICATIONS
Item
Description
Radio
915 MHz External Antenna
Regulatory Approvals
FCC Part 15 and Industry Canada
FCC ID: 2AAMXSCELV1000
IC: 11250A-SCELV1000
UL916
FCC ID: 2AAMXSCELV1000
IC: 11250A-SCELV1000
UL916
Transmit Range
300 ft. indoors line of sight to an Audacy Gateway or Smart Connector
Load Dimming
Forward Phase Triac Based Line Dimming
Load Amperage
5A
Switching Cycles
50,000
Power
120VAC/277VAC
Operating
Temperature
Temperature
0°C to 70°C
Storage Temperature
-20°C to 90°C
Installation
Environment
Environment
Indoor use only
Dimensions
4.67”x1.75”x0.99”
Warranty
1 yr