S.E.M. INDUSTRIES SEM-GB3600 Manuel D’Utilisation
E-7
OPERATION
USB & SD CARD MEMORY PORTS (For MP3 PLAYBACK)
KEY
NEXT
FUNCTION
BACK
For USB thumb drive & SD Card
Skip to next song
+ 10
FOLDER +
PLAY/ PAUSE
P-MODE
Press repeatedly until “USB” or “SD” is displayed
Skips 10 tracks forward during MP3 play (USB / SD card)
Press and Hold to Choose folder location on your USB/ SD Card
(Not usable in RANDOM play mode)
(Not usable in RANDOM play mode)
Skip to previous song
NOTE:
It takes time to “Open & Verify” a large USB-Drive/ SD-Card, and count all the song files.
If there are many files, it can take up to 60 seconds for this process.
It takes time to “Open & Verify” a large USB-Drive/ SD-Card, and count all the song files.
If there are many files, it can take up to 60 seconds for this process.
IMPORTANT: REMOVAL OF USB DRIVES & SD CARDS
Never remove SD Cards or USB drives from the unit during playback.
Always STOP playback, then press “FUNCTION” key to switch to another mode (FM/BT/AUX)
before removing your USB/SD memory to prevent damage to your song files and memory
device itself.
Never remove SD Cards or USB drives from the unit during playback.
Always STOP playback, then press “FUNCTION” key to switch to another mode (FM/BT/AUX)
before removing your USB/SD memory to prevent damage to your song files and memory
device itself.
- The following chart shows how to use USB/SD mode:
USB charging port
This unit is equipped with a DC 5V USB charging port on the back panel. To utilize this feature,
simply connect the device you would like to charge (eg. Smartphone or Tablet) to a suitable USB
cable and plug it into the USB charging port. (This function is only active when the unit is plugged
into an AC charger). The external device will be charged automatically when it is successfully
connected, even during playback.
The USB port should only be used when the AC-charger is plugged into the unit.
simply connect the device you would like to charge (eg. Smartphone or Tablet) to a suitable USB
cable and plug it into the USB charging port. (This function is only active when the unit is plugged
into an AC charger). The external device will be charged automatically when it is successfully
connected, even during playback.
The USB port should only be used when the AC-charger is plugged into the unit.
Start playback or pause playback
STOP
Stop playback
- - -
Power Supply : ............... Rechargeable Lithium 3.7V/ 2100mAh X 1 PC. (Built-in)
AC-Charger Input : ......... AC 100V-240V ~ 50/60Hz
AC-Charger Output : ...... DC 5V , 1A
Recharge Power : .......... USB 5V (minimum 500mA)
Radio Frequency : ......... FM 87.5 - 108 MHz
Speakers : .......3"x2 + subwoofers: 2.5" x2 passive radiators
AC-Charger Input : ......... AC 100V-240V ~ 50/60Hz
AC-Charger Output : ...... DC 5V , 1A
Recharge Power : .......... USB 5V (minimum 500mA)
Radio Frequency : ......... FM 87.5 - 108 MHz
Speakers : .......3"x2 + subwoofers: 2.5" x2 passive radiators
SPECIFICATIONS
NORMAL
PLAY
REPEAT
1
REPEAT
FOLDER
FOLDER
REPEAT
ALL
RANDOM
PLAY
- After inserting a USB memory drive or SD-Card (with MP3 Song Files), within 1 minute, the unit
will momentarily display the total number of MP3 songs it has found, and then immediately start
playing the first song (# 001).
will momentarily display the total number of MP3 songs it has found, and then immediately start
playing the first song (# 001).
Please do not use the USB charging port when the Boombox is fully discharged.
If the internal battery is fully discharged, the USB charging port will not work
because the Boombox will give priority to charging it's own internal battery first.
If the internal battery is fully discharged, the USB charging port will not work
because the Boombox will give priority to charging it's own internal battery first.
- - -