S.E.M. INDUSTRIES SEM-GB5000 Manuel D’Utilisation
E-7
OPERATION / SPECIFICATIONS
Microphone input
This unit comes with a microphone input function. To utilize this function, simply connect your
microphone to the 6.3mm (1/4”) input socket at the front of this unit. You can adjust the mic volume
and echo by rotating the microphone volume and echo knob respectively. This function works
perfectly during playback of all input sources including Bluetooth®, FM radio & Aux-Input, so you
can sing along from any source or device.
This unit comes with a microphone input function. To utilize this function, simply connect your
microphone to the 6.3mm (1/4”) input socket at the front of this unit. You can adjust the mic volume
and echo by rotating the microphone volume and echo knob respectively. This function works
perfectly during playback of all input sources including Bluetooth®, FM radio & Aux-Input, so you
can sing along from any source or device.
- - -
Power Supply : ............... DC 9V , 2.5A Through Built-in DC Jack
External AC-DC Power Adaptor 100V-240V ~ 50/60Hz
Battery: 6 x C-Cell/ UM-2/ LR14 type (Batteries Not Included)
Speaker : ........................ 4" X 2 PCS
Frequency : .................... FM 87.5 - 108 MHz
External AC-DC Power Adaptor 100V-240V ~ 50/60Hz
Battery: 6 x C-Cell/ UM-2/ LR14 type (Batteries Not Included)
Speaker : ........................ 4" X 2 PCS
Frequency : .................... FM 87.5 - 108 MHz
MP3 : .............................. 16-320 kbps (max. 999 Files/ 99 Folders)
Specifications
OPERATION
Sound Control:
- Adjusting loudness can be done by rotating the Volume Knob on this unit or the device you
have already paired with.
- You can also adjust the bass & treble knob (for stronger bass/ highs) for quality sound effect.
Note: if there is no playback, ensure the volume on both devices is not set to 0.
- Adjusting loudness can be done by rotating the Volume Knob on this unit or the device you
have already paired with.
- You can also adjust the bass & treble knob (for stronger bass/ highs) for quality sound effect.
Note: if there is no playback, ensure the volume on both devices is not set to 0.
USB THUMB DRIVE & SD CARD FLASH MEMORY (MP3 PLAYBACK)
The following chart shows how to use USB/SD mode:
The following chart shows how to use USB/SD mode:
KEY
NEXT
FUNC.
BACK
For USB thumb drive & SD Card
Skip to next song (Not usable in REPEAT 1 mode)
DISPLAY MODE
FOLDER +/ FOLDER -
PLAY/ PAUSE
P-MODE
STOP
Press repeatedly until "USB" or "SD" is displayed
Start or pause
NORMAL PLAY REPEAT 1 REPEAT ALL
REPEAT FOLDER
RANDOM PLAY
(NOTE: RANDOM PLAY is limited to songs within a selected folder only.)
»
»
»
»
Press Once: Stop playback
Press Twice: Reset the playback memory
Press Twice: Reset the playback memory
Spectrum Analyzer USB » information
ID 3
»
Choose folder location on your USB/ SD Card (Not usable in RANDOM play mode)
Skip to pervious song (Not usable in REPEAT 1 mode)
IMPORTANT: REMOVAL OF USB DRIVES & SD CARDS
Never remove SD cards or USB drives from the unit during playback.
Always STOP playback, then press “FUNCTION” key to switch to another mode (RADIO/BT)
before removing your USB/SD memory to prevent damage to your song files and memory
devices itself.
Never remove SD cards or USB drives from the unit during playback.
Always STOP playback, then press “FUNCTION” key to switch to another mode (RADIO/BT)
before removing your USB/SD memory to prevent damage to your song files and memory
devices itself.
Using Audio Line-in Connection (Aux-input)
This unit comes with 2 Aux-input sockets (AUX IN 1/AUX IN 2), allowing you to connect two
external devices at the same time.
You can switch between the 2 Aux-Input sources to “mix” your music quickly.
- Connect your external device to this unit using a standard stereo headphone (3.5mm to 3.5mm)
cable.
- Press “FUNCTION” key repeatedly until display shows “AUX-1”/ “AUX-2”, depending on which
socket you have plugged into.
- Ensure your AUX-1/AUX-2 socket device corresponds to the correct display.
- Switch on your external device & activate playback on it.
- Playback of external device will start momentarily. Adjust the volume control of the main unit
and your external device to the desired level.
- Playback control can be done only through your external device.
- Remember to switch off the unit when you finish using the external device.
This unit comes with 2 Aux-input sockets (AUX IN 1/AUX IN 2), allowing you to connect two
external devices at the same time.
You can switch between the 2 Aux-Input sources to “mix” your music quickly.
- Connect your external device to this unit using a standard stereo headphone (3.5mm to 3.5mm)
cable.
- Press “FUNCTION” key repeatedly until display shows “AUX-1”/ “AUX-2”, depending on which
socket you have plugged into.
- Ensure your AUX-1/AUX-2 socket device corresponds to the correct display.
- Switch on your external device & activate playback on it.
- Playback of external device will start momentarily. Adjust the volume control of the main unit
and your external device to the desired level.
- Playback control can be done only through your external device.
- Remember to switch off the unit when you finish using the external device.
NOTE:
It takes time to "Open & Verify" a large USB-Drive/ SD-Card, and count all the song files.
If there are many files, it can take up to 60 seconds for this process.
It takes time to "Open & Verify" a large USB-Drive/ SD-Card, and count all the song files.
If there are many files, it can take up to 60 seconds for this process.