Zhejiang Homeimpression Furniture CO . ltd S199 Manuel D’Utilisation
USB
Play/Pause
DC In
Audio in Headphones
Treble
Bass
Volume
OFF
ON
Prev
Next
SD
A6
A7
A5 A4
A3
A2
A1
A9
A8
A10 A11 A12
USB
Play/Pause
DC In
Audio in Headphones
Treble
Bass
Volume
OFF
ON
Prev
Next
SD
MP3/MP4/VCD/DVD/GAME
FEATURES
A-Control Panel
A1-Power On/Off Button Switch and Volume Adjustment
A2-Bass Volume Adjustment
A3-Treble Adjustment
A4-Headphone Plug in Jack
A5-Audio Input for Linking Futon
A6-9V DC Power Input Jack
A7-SD CARD
A8-USB IP/Charging
A9-Power Indicator Light
A10-Short press for play/pause
A11-Short Press for Prev
A12- Short Press for Next
A2-Bass Volume Adjustment
A3-Treble Adjustment
A4-Headphone Plug in Jack
A5-Audio Input for Linking Futon
A6-9V DC Power Input Jack
A7-SD CARD
A8-USB IP/Charging
A9-Power Indicator Light
A10-Short press for play/pause
A11-Short Press for Prev
A12- Short Press for Next
B-Accessories Supplied
B1-1.5m 3.5mm Stereo to 3.5mm stereo plug cable(1 PC)
B2-INPUT:100-240V AC 50/60Hz
OUTPUT:9V DC 1.5A 13.5W Main POWER Adapter
B2-INPUT:100-240V AC 50/60Hz
OUTPUT:9V DC 1.5A 13.5W Main POWER Adapter
Signal-to-Noise Rate(Amplifier):Subwoofer:>65db
Satellite: >60db
Frequency Response:30HZ∽20KHZ
Distortion:Subwoofer:<1%(F=100HZ)
Satellite:<1%(F=1KHZ)
Input:DC 9V/1.5A
Satellite: >60db
Frequency Response:30HZ∽20KHZ
Distortion:Subwoofer:<1%(F=100HZ)
Satellite:<1%(F=1KHZ)
Input:DC 9V/1.5A
step:
1:Unpack the power adapter DC9V/1.5A and connect it to the main power outlet, then to the
power jack on the control panel.(A6)
2:Start by rotating clockwise, confirm the Bluetooth light on, connecting by phone in pass
code:0000
3:Both SD/U and Audio can be stand by plug in,(red in Audio model; red flashing in SD/U model)
4:Short press Play/Pause for play and pause;press 2 seconds change into Bluetooth/SD/U/Audio
5:Short press for prev, long press for volume down(only work on Bluetooth and SD/U)
6:Short press for next, long press for volume rise(only work on Bluetooth and SD/U)
7:VOLUME: Power on/off button switch and volume adjustment
8:BASS: bass volume adjustment
9:TREBLE:Treble adjustment
10:Headphone: Headphone plug in jack
1:Unpack the power adapter DC9V/1.5A and connect it to the main power outlet, then to the
power jack on the control panel.(A6)
2:Start by rotating clockwise, confirm the Bluetooth light on, connecting by phone in pass
code:0000
3:Both SD/U and Audio can be stand by plug in,(red in Audio model; red flashing in SD/U model)
4:Short press Play/Pause for play and pause;press 2 seconds change into Bluetooth/SD/U/Audio
5:Short press for prev, long press for volume down(only work on Bluetooth and SD/U)
6:Short press for next, long press for volume rise(only work on Bluetooth and SD/U)
7:VOLUME: Power on/off button switch and volume adjustment
8:BASS: bass volume adjustment
9:TREBLE:Treble adjustment
10:Headphone: Headphone plug in jack
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.