FUJI TECOM INC. 0002 Manuel D’Utilisation
LNL-1 manual Fujtecom., Inc. 2014
13
2-2 Logger
[1] Antenna
This antenna is used for transmission and receiving.
[2] LED lamp
Displays ON/OFF of power supply and logger status.
[3] Serial number label
Serial number of loggers is indicated.
[4] Handle
This handle is used to attach the installation rope for installation of the logger.
[5] Mounting section
Since magnet is mounted on the tip, the logger can be installed on the valves,
etc.
etc.
When the logger is taken out from its storage case, the logger power supply is turned on. While the
logger is kept in its storage case, its power supply is turned off.
logger is kept in its storage case, its power supply is turned off.
Although the logger emits clattery sound when it is strongly swung up and down, there is no problem
with the product quality.
with the product quality.
Caution
Never remove the antennas from the analyzer and logger. If removed, failure may result.
Use the provided USB cable to connect the analyzer to a PC. If other USB cables than the provided USB
cable are used, failure may result.
cable are used, failure may result.