FUJI TECOM INC. 0002 Manuel D’Utilisation
LNL-1 manual Fujtecom., Inc. 2014
33
8. Data transfer to PC
8-1 Data transfer via USB cable
“PC Connection Screen”
“PC Connection Screen”
[1] This screen is displayed when the analyzer and the PC is connected via USB cable.
[2] Data is read from the management software side.
[2] Data is read from the management software side.
(See Page 55 and 68 of “Software volume” for the details.)
Caution
This screen cannot be displayed when the analyzer battery mark blinks.
If the remaining battery capacity is low, charge the battery or connect the AC adapter.
If the remaining battery capacity is low, charge the battery or connect the AC adapter.
8-2 Data transfer via SD card
[1] Turn off the analyzer power supply and take out the SD card from the main body.
[2] Insert the SD card into the SD card reader of the PC side.
[3] Read the data from the management software side.
[1] Turn off the analyzer power supply and take out the SD card from the main body.
[2] Insert the SD card into the SD card reader of the PC side.
[3] Read the data from the management software side.
(See Page 55 and 68 of “Software” for the details.)