Shenzhen Jetson Electronic Technologies Co. Ltd JET-TMT-02 Manuel D’Utilisation

SENSOR 

2

TYRE GUARD 

1

TYRE GUARD 

JET-M-300C

(MONITOR)

JET-M1-300C

(MONITOR)

JET-M2-300C

(MONITOR)

1  Introduction

2  Function

The monitor’s function is to receive the temperature and pressure information transmitted 

from a sensor fitted to each tyre and display this information on the screen in the specific 
units of measurement of your choice.
The  monitor  will  emit  an  alarm  when  a  tyre  pressure  or  temperature  varies  markedly   

from  the  targeted  tyre  pressure  and/or  temperature.  The  system  will  detect

thigh  or  low  air  pressure  as  well  as  high  temperature  or  rapid  leakage  from  the  tyres. 
The monitor will flash the red LED icon and an alarm will sound to remind the operator 
to  check  if  the  tyres  are  high  or  low  in  air  pressure,  leakage,  high  temperature  or  the 
monitor’s battery is low, or there is a problem with a sensor. This advanced tyre monitoring 
system offers these great features and benefits, is reliable, lightweight and compact.

3  Installation & Operating Instructions

The following instructions show the identification of operating buttons of the monitor.

Units Conversion
Temperature Units Conversion

F=9C/5+32
Note: C = Celsius; F = Fahrenheit 

Pressure Units Conversion 

1 Bar=14.5 psi
1 Bar=100 kPa

2

1 Bar=1.02 kgf/cm

installing the tyre sensors.

vehicle’s tyres to your required pressures. 

Note: It is recommended to set tyre pressures at those recommended by the manufacturer 
listed in the vehicle’s handbook.

“

”  button

“

” button

SET button

Congratulations  on  purchasing  the  new  TYRE  PRESSURE 
MONITORING 

(TPMS).This  system  is  a  safety  system 

for  monitoring  vehicle’s  tyre  air  pressure  and  temperature.  It 
consists  of  external  mounted  tyre  pressure  wireless  sensors 
fitted  to  the  vehicle’s  ryre  valve  and  a  hand-held  monitor.The 
sensor  will  monitor  the  tyre’s  air  pressure  and  temperature.The 
sensor  transmits  the  tyre  pressure  and  temperature  information
to the dash-mounted/hand-held monitor.

SYSTEM

in standby mode,press"    "button to change the pressure unit,white press"    "
button to change the temperature unit.

Please ensure the monitor is fully charged and in the tyre alignment mode before

Before installing sensors and setting the monitor,make sure you have inflated the

The monitor can be placed on the dashboard,on the sun visor or 
mounted in any convenient place in the vehicle.