Tri plus grupa d.o.o. ZBZWUS Manuel D’Utilisation
P a g e
| 3
Important Sa fety Informa t ion
To avoid contact with electrical current:
•
Never install an Ethernet connection in wet locations unless that
connector is specifically designed for wet locations.
connector is specifically designed for wet locations.
•
Do not place Ethernet wiring or connections in any conduit, outlet
or junction box containing electrical wiring.
or junction box containing electrical wiring.
•
Installation of inside wire may bring you close to electrical wire,
conduit, terminals and other electrical facilities. Extreme caution
must be used to avoid electrical shock from such facilities. Avoid
contact with all such facilities.
conduit, terminals and other electrical facilities. Extreme caution
must be used to avoid electrical shock from such facilities. Avoid
contact with all such facilities.
•
Ethernet wiring must be at least 2 m from bare power wiring or
lightning rods and associated wires, and at least 15 cm from
other wire (antenna wires, doorbell wires, wires from
transformers to neon signs), steam or hot water pipes, and
heating ducts.
lightning rods and associated wires, and at least 15 cm from
other wire (antenna wires, doorbell wires, wires from
transformers to neon signs), steam or hot water pipes, and
heating ducts.
Electromagnetic compatib ility
In proper state and when operated properly, the product complies with
all the requirements in respect of interference radiation according to
EN 301 489-17, EN 301 489-1 and EN 300 328. The connections
conducting HF signals must neither be manipulated nor damaged.
all the requirements in respect of interference radiation according to
EN 301 489-17, EN 301 489-1 and EN 300 328. The connections
conducting HF signals must neither be manipulated nor damaged.