Avocent PM2009H PM2009H-105 Fiche De Données

ENVIRONMENTAL SENSOR

Physical Dimensions (W x D x H)  

3 x 3 x 1.5 in. (7.6 x 7.6 x 3.8 cm)

Temperature Sensor 

Range: -45° to +115°C
Accuracy: 1°C 

Humidity Sensor (PMHD-THS only) 

Range: -0 - 100%
Accuracy: 2% 

Daisy Chaining Capability 

Up to 3 sensors per PDU sensor port

External Power Required 

No

Cable Type 

Standard CAT-5 Patch Cable

Maximum Cable Length 

1200 ft. (between the PDU and the last sensor  
in the daisy chain)

PM 3000/2000/1000 PDU 

firmware compatibility 

Version 1.3.0 and higher

HARWARE

Weight 

3- and 6-outlet horizontal models:  
27.3 lbs. without power cord  
10-outlet horizontal models:  
5.2 lbs. without power cord
24-outlet vertical models:  
14.8 lbs. without power cord 
20-outlet vertical models: 
11 lbs. without power cord

Physical Dimensions (W x D x H)  

3- and 6-outlet horizontal models:  
17 x 8.272 x 1.719 in. (43.2 x 21 x 4.4 cm) 
10-outlet horizontal models:  
17 x 5.5 x 1.7 in. (43.2 x 14 x 4.3 cm) 
24-outlet vertical models:  
2.2 x 3.15 x 66 in. (5.6 x 8 x 167.6 cm) 
20-outlet vertical models: 
2.2 x 3.2 x 52 in. (5.6 x 8.1 x 132.1 cm) 
Note: PM 1000 PDU height is 46 in. (116.8 cm)

Environmental

Operating Temperature: 50° to 113°F
(10° to 45°C) 
Storage Temperature: -40° to 149°F
(-40° to 65°C)

Network Connection

Number: 1
Type: 10/100/1000 Ethernet 

External Sensor Connections: 

Number: 2
Type: RJ-45 

Accessories Included 

Rack-mount kit, toolless-mounting hardware with 
vertical models and outlet retention clips

Warranty

Two Years

Communications options supported 

Browser, CLI, SNMP, Serial or IP (using DSView 3 
software or supported Avocent appliances)

Standards

Approved Agency: UL, FCC, cUL, CE, VCCI, 
C-Tick, CB

•  Outlet-Level, Phase-Level and Strip-Level Metering with Threshold/Alert  

Capabilities – Provides preemptive notification of any impending overload issues 
before they occur and simplifies the task of installing new equipment  

•  Capability to Remotely Switch Outlets Through Onboard Web Interface,  

DSView 3 Management Software – Allows power to hung up IT equipment to be 
recycled, turned on or turned off remotely for faster resolution time (not available on  
PM 1000 or PM 2000 PDUs)

•  Onboard Web Interface – Can be installed for direct access right out of the box 

or it can be configured as part of a larger integrated solution using the DSView 3  
management software

•  IP and Serial Interface Options – Options to install by connecting directly to the 

network or save IP connections by using the serial interface to connect directly to  
Avocent appliances already connected to the network 

•  Daisy Chaining – Saves the number of IP addresses or console/KVM ports that are 

required to manage all power distribution needs

•  Integration with DSView 3 Management Software – Single interface for management 

of IT equipment and PDUs simplifies mapping of outlets to servers and other equipment 
in order to reduce and minimize power cycling the wrong equipment

•  Integration with DSView 3 Software Power Manager Plug-In – Track historical trends 

to measure and monitor IT power consumption, capacity and cost in order to understand 
what issues exist and to make more informed decisions in the future

•  Electronic Overcurrent Protection (OCP) – An added layer of protection that is 

activated in the event of minor overloads; during such events, outlets are turned off  
first instead of the primary OCP tripping

•  Sequential Startup – Protects integrity of all upstream electrical infrastructure by 

staggering the inrush current draw of all plugged-in devices 

•  Supports Environmental Sensors – Chain up to six environmental sensors per PDU to 

measure and monitor temperature and humidity at several different points within the rack 
for notification of any impending environmental issues 

Daisy Chain

Environmental 

Sensors

Environmental 

Sensors