Shenzhen MeiDong Acoustics Co. LTD HE3 Manuel D’Utilisation

       2. Please pay attention to the sharp edge,uneven 

surface, metal parts, accessories and packaging.

       3. Please do not open, dismantle or repair this product, 

this may lead to fire,electronic breakdown or even 

completely damage the product, these are not included in 

the waranty.
      4. Do not wipe the product with oil and other volatile 

liquids.

    5. Please do not use this product in places where 

there is a potential personal safety risk and danger.

    A pair of Earbuds, mobile battery,Silicon Holder L 

and M each pair . Silicon Lagre ,medium and small 

earbud cap each pair ,data cable, storage bag, user’s 

manual.

Earphone

Micro USB 

battery cabinet

manual

cloth bag

L

M

S

PRODUCT   OVERVIEW

    Please fully charge the battery of the headset and 

the battery in charging dock before the first time 

operation. During magnetic contact charging, the red 

indicator will stay on, and it will turn blue when fully 

charged.

Note:

 

    1.During music playing, the blue LED indicator 

will blink slowly.

 

  2. The red LED indicator will flash when the 

headset battery is low.

     1. To ensure safety, please follow the rules 

mentioned in this manual. Before using the 

Bluetooth headset, we strongly recommend that you 

read this manual carefully.

     Touch Two Head-Set supports all function by 

Touch  operations. Our Design Team puts emphasis 

on both ergonomic design and user-experience as 

most important causes.Unlike most in-ear headsets 

which support push-button operation only. 
   Our touch-operation eliminates the discomfort 

to your ear while applying pressure to the button. 

Operation becomes effortless and comfortable. 

We use all funtion by touch in  our design which 

is extremely convenience when you sprot,enjoy 

music,and drivingor other activity. 

    Touch Two is also perfect for the active lifestyle, 

fast movements and high-impact workouts.  The 

removable outer silicone sleeve is slip-resistant and 

comfortable to fit for all ear sizes. 

STEP ONE: WEAR THE HEADSET CORRECTLY

    1, pay attention to identify the left and right mark, L 

for the left, R for the right .
    2, With the font "L" and "R" normally viewed and 

with the correct angle from up to down, insert the 

earbuds  into the ear properly, rotate it appropriately 

and feel the most comfortable and not easy to drop, and 

if it will not drop when trying to shake your head, it 

indicates wearing is ok.

    3, For the user with smaller ears, try to remove the 

earbud cap, try to wear again.

    4, in order to get the best audio experience, please 

try every different size of the silicon earbud cap.

   1. Before the right and left earbud pairing, turn off the 

Bluetooth function of your phone toavoid two earbud’s 

pairing name appearing at the same time, please do not 

click any one of two pairing names if you have not 

closed the bluetooth function on your phone.

    2. Hold down the multi-function button on right and 

left earbud for about 6 seconds, the tone "Power on" and 

"Pairing" will be heard oneafter another, wait until the 

earbud sending the "beep beep" tone , then loosen your 

hands immediately , the earbuds now enter into pairing 

mode and the interval " Beep " tone will sound,now the 

red and blue indicator flashes alternately, once you hear 

" beep " tone, the earbud pair with each other 

successfully and the blue LED indicator will flash 

slowly. 

    3. After pairing success, regardless of whether to 

connect the phone or not, hold down touch screen on 

right or left earbud for 3 seconds, both earbud will be 

turned off and the tone "Power off" will be heard.

    4. Automatic connection: it need to connect the phone 

and play music, please operate as the STEP THREE 

operation, connect the left earbud with the phone, then 

power on the right earbud, once your hear “Beep” sound, 

automatic connection is completed.

1. Initial connection:
    1.1 Activate the Bluetooth function on phone and 
enter the Bluetooth settings interface
1.2 Power on the earbud and try pairing:
   Hold down the multi-function button for 4 seconds, 
the red LED indicator will flash fast, the tone "Power 
on" and "Pairing" will be heardthe pairing name "Touch 
one " will appear on pairing list, select it, if a password 
needed, please enter" 0000 ", when a" beep "sound tone 
heard, the connection is successful, now thegreen 
indicator will flash slowly, the earbud connected will be  
the main unit and it can be connected with the phone for 
communication.
1.3 Stereo connection of two earbuds:
    Make sure you have completed the 1.2 operation, and 
both earbuds paired, short press to open the right earbud, 
onec “beep” heard, now it enters stereo mode, the green 
indicator will flash slowly, now you can enjoy “Touch 
one” unrestrained wireless stereo!
1.4 Earbud shutdown:

    Hold down the multi-function button for about 

4seconds, the red indicator will turn off and  the"Power 

off" tone will beheard.

    Hold the multi-function button on left earbud for 2 

seconds, once the "Power on" tone heard, then loosen 

your hand, the left earbud will automatically connect 

with the phone, once the "beep" tone heard, the 

connection is successful. The left earbud will connect 

with the right earbud if the right earbud is powered on at 

the same time.

●When the Touch one is not in pairing mode, the phone 

will not be able to search for the earbuds. Please confirm 

before searching (red and blue indicators flash 

alternately).
● If the earbuds can not search the pairing unit(about 

5 minutes), it will turn off automatically.

  

“Touch Two” allows the user to use the touch mode 

according to the different scenes or personal habits.
1.Earbud Calling:
   When the button on main earbud is effective during 

calling(caller number will be prompted), and the sound 

only exits in the main earbud.

    There are four indicators on mobile power supply, one 

indicator represents 25% of the electricity it indicates 

only 25% of the electricity remained when only one 

indicator lighting.

   The red indicator will stay on, and it will turn blue after 

fully charged. the four indicators will display the 

remaining power while the earbud is just put into the 

charging dock,and the cycle of flash, the mobile power 

indicator will turn  off  after  about 5 seconds.

    Put the earbuds into the magnetic contact, during 

charging the mobile power, It will activate the indicator 

and showing the remaining power.

    Use a USB cable to connect the phone adapter or the 

computer's MIC-USB port.

    Battery: Polymer lithium battery 45mAh

    Bluetooth version: 4.1

    Operating voltage: 3.2V-4.2V

    Sound unit: 8MM moving speakers

    Impedance: 32Ω

    Speaker sensitivity: 105dB

    Speaker Bandwidth: 20-20KHz

    Microphone sensitivity: -42 + -2db

    Bluetooth frequency: 2.4-2.48GHZ

    Bluetooth working range: 10 meters

    Bluetooth protocol: A2DP / HFP / HSP / AVRCP

Eardbud working range: 10M 

Single earbud calling time:3hours 

Single earbud music time: 2 hours / battery life: 6hours 

Single earbud standby time: 12 hours * / battery life: 

240 hours

    2. Call time and music playing time test bases on the 

70% volume.

    3. Standby time: the longest standby time when no 

call and no music playing.

    4. Battery life time is the number of hours for 

charging the earbud once the battery is fully charged. 

    5. In different environments, such as low temperature 

environment, the battery life of the earbud  and mobile 

power battery will be affected.

    1. Working(communication) range will change 

depending on the operating environments

   You must choose a certified chargers produced by 

authorized manufacturer. If the product is not used for 

long period (more than 3 months), please recharge it.

Charger capacity: 300 mAh

DC charging voltage: DC5V

DC C
FCC ID: 2AB5T-HE3

harge Current (MAX): 1A

Battery is low

Recharge the earbuds

The volume is too high or the environme

nt is too noisy

Adjust the volume or change a place

Pairing operation is incorrect

Re-pairing

Environmental in terference or operation r

angei s too far

Change a place or make the earbud and

audio equipment closer

Earbuds are not put down properly

Check if the earbud is in place

Operaion range is too far

Put the phone closer to the main earbud or 

keep it from the outer interference signal

Battery is low

Recharge the earbud

Low battery and red indicator illuminates

Recharge the earbuds immediately

Not wearing pro perly

Adjust the position of the earbudsand adju

st the volume level manually

Unable to power on

No sound after paired

Can talk,but red indicator illuminates

No indicating when charging

Automatic shutdown of the earbud

With echo in earbud

Call with noise

Small voice on opposite side

Bad signal and intermittent

    1. Do not use in thunderstorms, it may lead to failure 

and increase the risk of electric shock.

     2. Do not disassemble or modify the head phones for 

any reason, as this may cause  malfunction or burning, 

send it to Authorized service centerfor repair.

     3. Please put the earbuds and the accessories out of 

the reach of children and pets,

    4. Do not put the product in water.

    click the Touch interface once quickly, then the "beep" 

sound will be heard,  the phone is connected, double-

click the touch interface, then the "beep" sound will be 

heard, the phone is hung up.

   

●the user may not be familiar with the double-click the 

rhythm during initial operation, it is recommended that 

you wear a earbud, and with the other one in hand, and at 

the same time watching the player to try several times, 

you can quickly grasp.
   

●Click on the touch interface with the Intention

3.Rejected calls:
     2.1 touch operation: hold the touch interface for 2 

seconds to hang up. 
4.

    3.Touch the screen twice quickly to redial the last dialed 

number.  

   play music: double-click the touch interface the 

music will automatically play, double-clickagain to pause.

    During playing or pausing, hold the touch Interface 

for 2 seconds to skip to the next song.Theoperation can 

only be implemented by touch interface.

STEP FIVE: MOBILE POWER OPERATION

● Please fully charge the battery of the earbuds and the 

battery in battery dock before the first time operation.
●During music playing, the blue LED indicator on 

earbud flashes slowly.
●The battery of the earbud is low, the red indicator 

will flash.

“ Touch Two” takes the magnetic contact with two 

charging dock as the charging method, automatically 

align by aiming the earbud at the corresponding dock, 

and it will start charging, during charging,the red 

indicator will stay on, and it will turn blue after fully 

charged.

The second step of the left and right ear pairing 

connection operation

2.4 Also, you could press the botton of the case, that selcet 

the power on and off. one press, the power on, and charging 

the earbuds. long press, cut off the power to charing.

新编  85*58.5MM/六折页/正反黑白印刷/158g铜版纸

正面

反面

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 

elevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.