TECNICAS CIENTIFICAS PARA LABORATORIO S.A. T620 Manuel D’Utilisation
ISEsweat
- User’s Manual 36
ISEsweat parts missing
Check the components
Remember:
Remember:
-
If you think any accessory is missing, please check carefully all the package contents.
If you do not find the missing piece, please inform TECIL logistic department at once.
TECIL can only take responsibility for missing items if notified within 15 days of
receipt.
If you do not find the missing piece, please inform TECIL logistic department at once.
TECIL can only take responsibility for missing items if notified within 15 days of
receipt.
-
If you receive any damaged items, please keep the packaging material for later
inspection and inform the TECIL logistics department within 24 hours of receipt.
inspection and inform the TECIL logistics department within 24 hours of receipt.
If you are returning goods to TECIL get in touch with TECIL Technical Support Service to get
shipping instructions. Unless TECIL Technical Support Service says otherwise, you don’t
need to return sensor cards or any other accessories with the ISEsweat
®
.
Send ISEsweat
®
with the original package. If you don’t have the original package, please use
an appropriate box and adequate wrapping material to protect the ISEsweat
®
during
shipment. If you have any doubt, please check with TECIL Technical Support Service before
sending the device.
sending the device.
6.1 Technical service
The ISEsweat
®
does not need a routine technical service or calibration, but the battery needs
to be changed every 24-36 months. Check the battery change process in the ISEsweat
®
user
manual (Battery change chapter).
6.2 Periodic security check
It is recommended that you do the following every 24 months:
-
Check the equipment for any mechanical or functional damage.
-
Check the security and information labels to make sure they are still legible.
6.3 Cleaning
CAUTION: Do not spray, pour or spill any liquids on or near the ISEsweat
®
or its connectors
and switches.
You can clean the ISEsweat
®
whenever you think it is appropriate, or in accordance with
procedures laid down at your Hospital or Laboratory. Please bear in mind:
-
ISEsweat
®
surfaces can be cleaned with a cloth slightly moistened with a commercial
non-abrasive cleaning product or alcohol, but don’t rub too hard.
-
Make sure the data port connectors on the base unit are dust free with a dry cloth.
Connectors on the remote unit will accumulate grease because they are in contact
with the skin. Clean them with alcohol.
Connectors on the remote unit will accumulate grease because they are in contact
with the skin. Clean them with alcohol.