Suzhou Bescon Electronics Co. Ltd RCN1008 Manuel D’Utilisation
User Manual for RCN1008
The remote control used RF4CE protocol to send RF signals (buttons and rotary wheel) for
device controlling. The remote can be used after pairing with a dedicated device which was
installed with a receiver dongle.
installed with a receiver dongle.
RCN1008 was used as a dongle which need to be installed in customer’s device. It offers
several different interfaces, like UART, SPI and I2C to communicate with customer’s device
according predefined protocol.
according predefined protocol.
1: product figure (RCN1008)
3: Technical specifications
RF operating frequency: 2425MHz, 2450MHz, 2475MHz
Reference frequency: 2.400GHz
Channel spacing: 25MHz
Modulation method: Offset-Quadrature Phase Shift Keying
Communication rate: 250Kbps
Output power: 1DBm
Communication mechanism: applied Zigbee frequency hopping mechanism, passively frequency
hopping.
Average operating current:<25mA
Static operating current: key press waking up <30uA
Operating voltage:2.5V-3.4V