SALIX TECHNOLOGY CO. LTD. SMC90 Manuel D’Utilisation
6
2).
Add the following line into drivers/net/wireless/Makefile, CONFIG_RTL8192CU
is for <compile_flag>, rtl8192cu is for <folder_name>:
3). Add the following line into drivers/net/wireless/Kconfig, rtl8192cu is for
<folder_name>:
4).
Config kernel, for example, with
‘make menuconfig’ command to select ‘y’ or ‘m’
for our driver.
5).
Now, you can build kernel with
‘make’ command.
6.
Compiling Driver
6.1.
Compiling Driver in Driver Source Folder
For compiling driver in the original driver source folder, simply cd into the
driver source folder and start build driver with
‘make’ command.
If everything goes well, it will produce a MODULE_NAME.ko file. The
MODULE_NAME is specified in Makefile. Please refer to:
“MODULE_NAME” in “4.2. Platform Setting Section in Detail”.
6.2.
Compiling Driver under Kernel Tree
For compiling driver under kernel tree, please refer to:
“5. Integrating Driver Source into Linux Kernel Tree”.
“5. Integrating Driver Source into Linux Kernel Tree”.
7. Driver Installation
If you have compiled Wi-Fi driver as kernel module and produced a .ko file such
as 8192cu.ko, you should insert driver module with
‘insmod’ command:
As for driver compiled in kernel, it has no need to do
‘insmod’ command.
root@rtl8188C_8192C_8192D_usb_linux_v3.3.0_2920.20111123# insmod 8192cu.ko
root@rtl8188C_8192C_8192D_usb_linux_v3.3.0_2920.20111123# ./make
source "drivers/net/wireless/rtl8192cu/Kconfig"
obj-$(CONFIG_RTL8192CU) += rtl8192cu/