Zhongshan Victor Electronics Co. Ltd VT368 Manuel D’Utilisation
Learning remote control(2pcs can be learn at one time),the steps as follow:
1. Under disarm status, open car door and step on foot brake, turn ACC from OFF to ON for
3 times, finally stop at ON position. LED indicator light uninterruptedly which indicating
the system has enter into learning status. Or open car door and step on foot brake, turn on
the ACC, press emergency button for 3 times,the system will enter into learning status.
2. Press any button within 10 seconds, siren chirp once indicating the first button has been
learned successfully.
3. Repeat step 2 to learn the 2
nd
remote(siren chirp twice indicating the 2
nd
remote has been
learned successfully); After the 2
nd
remote be learned successfully, the siren will chirp twice
indicating the system is going to exit the state of learning mode.
4. During learning process, turn the car key to OFF position, or no action to remote control
within 10 seconds, the system will exit the state of learning mode automatically. At this
moment the siren will chirp twice too.
When disarm, open the door, turn ACC to ON .
Function model
Setting/ way to change
Siren sound 1 time
Siren sound 2 tiems
1、Low temperature
detection
Press
+
2
seconds
able
※disable
2、timer engine start
press
+
2
seconds
Able
※disable
3、door open alert
Press
2 seconds
※able
disable
4、door open delay, doom
light delay.
按
+
键 2 秒
※5seconds 30seconds
with “※” marks are the factory settings