Cyrus Audio Ltd. JG12 Manuel D’Utilisation
Cyrus Pre
DAC
User Instructions
14
Tape/Disc Playback and Recording
Playback: You can play back a recording by selecting the
Analogue Input to which you connected your tape recorder.
Recording: If you have connected the Zone 2/Tape output
Recording: If you have connected the Zone 2/Tape output
sockets to the input of your tape recorder, you can make
recordings from the input sources connected to your
amplifier.
As supplied from the factory, the recording signal will always
As supplied from the factory, the recording signal will always
track the same source as the main system is playing. You can
however, select a different source for recording if required.
To change the source, press the front panel Zone 2 key to
display the input source currently selected for recording.
While the Zone 2 indication is showing on the display, turn
While the Zone 2 indication is showing on the display, turn
the rotary control to select a different source. Press the
Zone 2 key again to confirm selection of the input source
displayed.
NOTE: Input 6 is recommended for playback connection of
NOTE: Input 6 is recommended for playback connection of
a Tape Recorder as it is not selectable for Zone 2/Recording
purposes.